Vapeforums.lv - Tvaikam ir nozīme!

Original Yiloong Fog Box 75W TC VW Variable Wattage Box Mod - DNA75C Chip $199.99
The Original Yiloong Fog Box 75W is a high end box mod made from stabilized wood, which gives it beautiful wood grain pattern. Powered by DNA75C chip, the maximum wattage can reach 75W. The temperature control range is 200~600'F. The bottom has several venting holes for heat dissipation. It is powered by 1 x 18650 battery (not included).

Original Yiloong Bottom Feeder Squonk Mechanical Box Mod $129.99
The Original Yiloong Bottom Feeder Squonk Mechanical Box Mod is made from stabilized wood, which gives it beautiful wood grain pattern. The mod is very convenient to carry and use due to the mini size. It comes with spring center pin and 510 threading connection, as well as short circuit protection. It is powered by 1 x 18650 or 20700 battery (not included).

Original Yiloong Fog Box 75W TC VW Variable Wattage Box Mod - DNA75W Chip $180.99
The Original Yiloong Fog Box 75W is a high end box mod made from stabilized wood, which gives it beautiful wood grain pattern. Powered by DNA75W chip, the maximum wattage can reach 75W. The temperature control range is 200~600'F. The bottom has several venting holes for heat dissipation. It is powered by 1 x 18650 battery (not included).

YFTK ASAP Bottom Feeder Squonk Mechanical Box Mod Clone $48.99
The YFTK ASAP box mod Clone is a 3D printed mod with ABS material. Coming with inner bottom feeder bottle for squonking, the mod features magnetic battery door, rechangeable decorative rings made from 316 stainless steel and super light weight. It is very convenient to use and is powered by 1 x 18650 battery (not included).

M1P5 V2 Stacked Extended Hybrid Mechanical Mod Clone $25.99
The Able XL Stacked Mechanical Mod Clone is constructed from copper. It features 510 hybrid connection and knurled top hat, sleeve and button. The bottom fire button contains opposite magnets. The contact is made from copper for better conduction. The mod can be used alone with 1 x 18650 battery, and comes with extra tube to extend the length of the mod and need 2 x 18650 batteries (batteries not included).This item also has many color to choose.

Able XL Stacked Extended Hybrid Mechanical Mod Clone $25.99
The Able XL Stacked Mechanical Mod Clone is constructed from brass. It features 510 hybrid connection and knurled top hat and button. The bottom fire button contains opposite magnets. The contact is made from copper for better conduction. The mod can be used alone with 1 x 18650 battery, and comes with extra tube to extend the length of the mod and need 2 x 18650 batteries (batteries not included).This item also has many color to choose.

PTI DOT V4 RDA Rebuildable Dripping Atomizer Clone $7.59
The PTI DOT V4 RDA Clone is constructed from aluminum (top cap, middle cap) and stainless steel (base) in 24mm diameter. The RDA features a revolutionary single post build deck for dual coil building. With large clamping space, it can handle different types of building. The deep juice well can storage more e-liquid than other drippers. The RDA comes with side adjustable airflow. The RDA comes with 810 wide bore drip tip.This item also has many color to choose.

Original Steam Crave Aromamizer Supreme V2 RDTA Rebuildable Dripping Tank Atomizer $26.99
The Original Steam Crave Aromamizer Supreme V2 RDTA is constructed from stainless steel in 25mm diameter. It features large capacity of 5ml and convenient top fill design, as well as enhanced airflow and juice flow design. The two post build deck comes with velocity style posts for coils of more than 6mm internal diameter. The supreme dipper tank system will bring you great vaping experience.This item also has many color to choose.

Coppervape Taifun GT II Air RTA Rebuildable Tank Atomizer $13.99
The Coppervape Taifun GT II Air RTA is a large size tank in 23mm diameter, constructed from 316 stainless steel. The multi-window sleeve looks great with frosted inner tank. It features 5ml large capacity, convenient top fill design, juice flow control. The parts can be easily disassembled and the two post build deck supports single coil. The tank comes with bottom adjustable airflow. The AFC ring has four slots for changing airflow flexibly. The 510 drip tip and narrow air channel provides dense flavor.

YFTK O-Atty RDA Rebuildable Dripping Atomizer Clone with BF Pin $19.99
The YFTK O-Atty RDA Clone is constructed from 316 stainless steel in 22mm diameter. It comes with simple design but with a quad-post build deck for flexible coil building, supporting both single and dual coils. The RDA comes with middle side adjustable airflow and removable drip tip.
The RDA comes with bottom feeder pin.

Vape Breed V4 RDA Rebuildable Dripping Atomizer Clone $6.99
The Vape Breed Atty V4 RDA Clone is constructed from stainless steel in 24mm diameter. The top cap is beveled to fit the drip tip. It features side adjustable airflow and bottom direct airflow. The two post build deck features stair style posts with four holes. Each post has two slot screws on top. It is easy to build both single and dual coils. The 510 protruding pin makes it compatible with hybrid mods. The RDA comes with removable wide bore drip tip.

Original Avatar RC Reverse Charging Adapter for Eleaf Pico Dual / Wismec Reuleaux RX300 Box Mod $2.99
By connecting to a mod with 510 threading connection, the Original Avatar RC Reverse Charging Adaptor is designed to make your e-cig device be used as a power bank to charge external electronic devices.
Plesae note: the Avatar RC Adaptor can be used with the Eleaf Pico Dual and Wismec RX300 devices.

Bettle Craft Hybrid Mechanical Mod Clone $25.99
The Bettle Craft Mechanical Mod Clone is constructed from brass in 24mm diameter. It features 510 hybrid top hat with knurled design, silver plated contacts, and eleven venting slots on both side, which gives it nice look and better heat dissipation. It is powered by 1 x 18650 battery (not included).

HStone Vader Hybrid Mechanical Mod Clone $16.99
The HStone Vader Mechanical Mod Clone is constructed from stainless steel. It comes with a hourglass shape with 32mm maximum diameter and 24mm minimum diameter. With 510 hybrid connection, the mod features stylish look. 4 grooves are on two sides and 5 venting holes are on another two sides, which is also good for heat dissipation. The mod is powered by 1 x 18650 or 20700 battery (not included).This item also has many color to choose.

VGME Hybrid Mechanical Box Mod $41.99
The VGME Mechanical Box Mod Clone is made from stabilized wood with 510 threading hybrid connection. The beautiful stab wood has variance of color and grain patterns on the surface. The mod has a large fire button on top, which is removable. It has very mini size and is powered by 2 x 18350 battery (series connection, not included).
This mod will be shipped in random color, more options than what's on the image.

Reload RTA Rebuildable Tank Atomizer Clone $11.99
The Reload RTA Clone is constructed from 316 stainless steel in 24mm diameter with 3.5ml capacity. It features post-less deck design for single or dual coil build and gold-plated 510 positive pin. Comes with bottom side adjustable air slots for airflow control, you can enjoy better flavor and cloud. The RDA comes with a wide bore ULTEM 810 drip tip.This item also has many color to choose.

YFTK Comet BF Capable RDA Rebuildable Dripping Atomizer Clone with Squonk Pin $19.99
The YFTK Comet BF Capable RDA Clone is constructed from 316 stainless steel in 22mm diameter. The easy-to-build two post clamp design is for single coil use with large air flow intakes that hit the coil on both sides, producing extremely dense and smooth vapor. It comes with a removable POM drip tip.
The RDA comes with bottom feeder pin.

Replacement 510 Drip Tip for RDA / RTA / Sub Ohm Tank $1.99
The replacement 510 drip tip is made from resin in 18mm height. It comes with two silicone o-rings around the connector. It is suitable for RDA / RTA / Sub Ohm Tank that is compatible with 510 drip tip.

Original Wick 'N' Vape Cotton Bacon Comp Wrap Heating Wires - Nichrome + Nickel + Kanthal $11.99
The Wick 'N' Vape Cotton Bacon Comp Wrap Heating Wires is perfect for RBA / RTA / RDA atomizers. It feature 20GA wires, which will be a good choice for DIY. Finally the perfect Comp Wire, specifically designed to be used on more devices. A unique Nichrome blend with lower nickel content and added properties of Kanthal. Providing optimal ramp time, long pulls and longer life span. Everything you've been waiting for from a comp wire. Bacon bits Included in every pack.This item also has 22/24/26GA versions to choose.

VGME Hybrid Mechanical Box Mod Clone $41.99
The VGME Mechanical Box Mod Clone is made from stabilized wood with 510 threading hybrid connection. The beautiful stab wood has variance of color and grain patterns on the surface. The mod has a large fire button on top, which is removable. It has very mini size and is powered by 2 x 18350 battery (series connection, not included).
This mod will be shipped in random color, more options than what's on the image.

Original Stentorian AT-7 100W 3500mAh Box Mod $72.99
Designed in California, the Stentorian All Tech AT-7 100W Box Mod comes with a unique computer chassis design inspired by water-cooled mainframe computer. Powered by American AT chipset and built-in 3500mAh battery, the max power can reach up to 100W. It also features multiple security protection with long circulation service time and 2 hours fast charge. The mod has adaptive smart power output, supporting max 10W, and resistance range of 0.1~3.0ohm and various tanks.This item also has many color to choose.

Rogue Hybrid Mechanical Mod Clone $19.99
The Rogue Mechanical Mod Clone is constructed from brass in 24mm diameter. It is powered by 1 x 18650 or 20700 battery (not included). It features 510 hybrid top cap and spring fire button.This item also has many color to choose.
Please Note: This mod is without anti-oxidation process, please don't touch it with hands directly.

SXK Steam Tuners RTA Rebuildable Tank Atomizer Clone $17.90
The SXK Steam Tuners RTA Clone is constructed from 316 stainless steel in 22mm diameter. It features 3ml tank capacity, two posts deck and bottom adjustable airflow. The floating deck is easy to build single coil with two posts. The bottom air inlet brings inflow to the coil directly. The tank comes with protruding center pin to be compatible with hybrid mods.

Original Vapjoy Amos 900mAh VV Sub Ohm Starter Kit $14.99
The Original Vapjoy Amos Starter Kit comes with a 900mAh Amos Mod and one Amos Tank.This item also has many color to choose.
Mod:
The Amos Mod is constructed from stainless steel and brass with built-in 900mAh lithium-ion battery. It comes with 510 / eGo threading connection. When clicking the button 5 times, it will be turn on / off, while clicking 3 times is to vary the voltage. There are 3 colors to show different voltage, red for 2.7V, Blue for 3.2V, and Green for 3.7V.
Tank:
The Amos Tank is constructed from stainless steel in 15mm diameter. The glass tank can hold about 1.5ml e-juice. It comes with eGo threading connection and 0.5ohm atomizer resistance. The tank has bottom adjustable airflow with 2 airslots. It comes with removable stainless steel 510 drip tip.

Original IJOY Genie PD270 234W TC Temperature Control Box Mod + Captain S Tank Kit $65.99
The mod kit comes with IJOY Genie PD270 234W TC Mod and IJOY Captain S Sub Ohm Tank.This item also has many color to choose.
Mod:
The Genie PD270 is a new box mod which follows up the hottest set from IJOY, the captain PD270 mod, packing in a unique mod design, and it has a 234W TC chipset from IWEPAL, powered by dual 20700 batteries, the Genie PD270 features a curved and ergonomic design intended to fit comfortably within the user's hand during use and RGB backlight on device make for a unique user customization. There are 5 color options for the lights (red, blue, green, white and colorful) and 2 customize RGB color settings which can be programmed for different styles with digital color separation techniques. Genies PD270 is suitable for various atomizers in the market even no overhang with 30mm tanks. Whats more there is a LED flashlight control button on the battery door which supports the device used as a flashlight. IJOY Genie PD270 is a critically acclaimed platform for users looking for a cool, magic and exquisite device.
Tank:
The IJOY Captain S Sub Ohm Tank is a 25mm tank that features a specially designed groove located below the juice reservoir and right above the coil placement. This result in a reduction in heat transmission route and helps prevent the entire structure from heating up during extended use. And a new thread-less coil system for easy coil replacement. The Captain S sub ohm Tank is conveniently filled via the sliding top cap. Bring you the smoothest airflow and the best flavor!
Please note: there is no battery included in this mod kit.

Original IJOY RDTA Box Triple 240W TC VW Variable Wattage Box Mod + RDA Kit $52.99
The mod kit comes with one IJOY RDTA Box Triple and one rebuildable atomizer.This item also has many color to choose.

Mod:
Comes with a built-in washable huge 12.8ml juice capacity tank and IJOY IMC Interchangeable building deck system, as well as the compatibility with IJOY COMBO RDTA and IJOY Limitless RDTA classic, powered by triple 18650 batteries, up to 240W, the RDTA BOX TRIPLE provides a limitless expandability and versatility, make it a must buy for all build enthusiasts.
Atomizer:
The atomizer comes with one interchangeable gold plated build deck (IMC-10) and one pre-built coil (IMC-Coil 3), which features 0.15 ohm resistance and rated for 50~100W.

360 Degrees Rotating 810 Drip Tip for TFV8 / TFV12 / Goon / Kennedy $2.59
The 810 Drip Tip is made from stainless steel in 35mm height. It can be rotated by 360 degrees. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.

Original Eleaf IC Coil Head for iCare / iCare Mini / iCare 2 Starter Kit $3.99
The Original Eleaf IC head features 1.3 ohm resistance and rated for 5 to 15W.
Eleaf engineered a new atomizer head named IC 1.3ohm Head for iCare series products. It is consisted of a single coil and tiny in size. Small yet efficient, this new IC 1.3ohm Head is compatible with VW / Bypass / Smart mode and is able to deliver a satisfying amount of vapor with nice flavor especially for mouth to lung inhaling.
This product comes with 5 PCS in 1 pack.

Original IJOY Genie PD270 234W TC 3000mAh VW Box Mod with Battery $54.99
The Genie PD270 is a new box mod which follows up the hottest set from IJOY, the captain PD270 mod, packing in a unique mod design, and it has a 234W TC chipset from IWEPAL, powered by dual 20700 batteries, the Genie PD270 features a curved and ergonomic design intended to fit comfortably within the user's hand during use and RGB backlight on device make for a unique user customization. There are 5 color options for the lights (red, blue, green, white and colorful) and 2 customize RGB color settings which can be programmed for different styles with digital color separation techniques. Genies PD270 is suitable for various atomizers in the market even no overhang with 30mm tanks. Whats more there is a LED flashlight control button on the battery door which supports the device used as a flashlight. IJOY Genie PD270 is a critically acclaimed platform for users looking for a cool, magic and exquisite device.This item also has many color to choose.
Please note: this mod comes with 2 x 20700 batteries.

Original IJOY Genie PD270 234W TC Temperature Control Box Mod $42.99
The Genie PD270 is a new box mod which follows up the hottest set from IJOY, the captain PD270 mod, packing in a unique mod design, and it has a 234W TC chipset from IWEPAL, powered by dual 20700 batteries, the Genie PD270 features a curved and ergonomic design intended to fit comfortably within the user's hand during use and RGB backlight on device make for a unique user customization. There are 5 color options for the lights (red, blue, green, white and colorful) and 2 customize RGB color settings which can be programmed for different styles with digital color separation techniques. Genies PD270 is suitable for various atomizers in the market even no overhang with 30mm tanks. Whats more there is a LED flashlight control button on the battery door which supports the device used as a flashlight. IJOY Genie PD270 is a critically acclaimed platform for users looking for a cool, magic and exquisite device.This item also has many color to choose.
Please note: there is no battery included for this mod.

Kindbright Totem Mechanical Mod Clone $21.99
The kindbright Totem mechanical mod Clone is constructed from brass in 24mm diameter. The maximum diameter is 26mm. It features innovative anti-rattle system and battery thermal insulator. The fire button comes with gold plated spring. The mod can fit 24mm and 25mm atomizer well.This item also has many color to choose.

Coppervape Taifun GT III RTA Rebuildable Tank Atomizer Clone $12.99
The Coppervape Taifun GT III RTA Clone is constructed from 316 stainless steel in 23mm diameter. It features top-fill system, 5ml borosilicate glass tank, and postless build deck. With the completely new technology, the coil can be easily attached and can be changed or controlled easily even with a full tank. The GT III offers virtually no resistance to draw. With easily turning the airflow it can also be used for smoking without inhaling.

Kindbright Reload 1.2 RDA Rebuildable Dripping Atomizer Clone $12.59
With more refined craftsmanship, the Kindbright Reload 1.2 RDA Clone is constructed from stainless steel in 24mm diameter. It features two posts large build deck for both single and dual coil building, coming with direct bottom airflow to the coils. The hexagonal top mounted screws match the shape of posts well. The RDA comes with 810 wide bore drip tip.This item also has many color to choose.

Original GeekVape Peerless RDTA Rebuildable Dripping Tank Atomizer $34.88
Another amazing tank from Geekvape, the Peerless RDTA features upgraded Peerless build deck and improved hinge-lock filling system, making building and refilling extremely easy. It produces outstanding flavor with its precise side airflow system. The Peerless is compatible with both 810 and 510 (with adapter) drip tips.This item also has many color to choose.
Please note: this RDTA is 2ml EU version with 2ml silicone block for TPD compliance.This item also has a standard version with 4ml capacity.

SXK BB 60W All-in-One Box Mod Kit Clone $129.00
The SXK BB Box mod Clone is constructed from aluminum with an all-in-one design. It is powered by 1 x 18650 battery (not included) and maximum power output is 60W.The box mod is powered Evolv DNA 60 chip.This item also has many color to choose.

Original IJOY Genie PD270 234W TC 3000mAh VW Mod with Battery + Captain S Tank Kit $66.89
The mod kit comes with IJOY Genie PD270 234W TC Mod and IJOY Captain S Sub Ohm Tank.This item also has many color to choose.
Mod:
The Genie PD270 is a new box mod which follows up the hottest set from IJOY, the captain PD270 mod, packing in a unique mod design, and it has a 234W TC chipset from IWEPAL, powered by dual 20700 batteries, the Genie PD270 features a curved and ergonomic design intended to fit comfortably within the user's hand during use and RGB backlight on device make for a unique user customization. There are 5 color options for the lights (red, blue, green, white and colorful) and 2 customize RGB color settings which can be programmed for different styles with digital color separation techniques. Genies PD270 is suitable for various atomizers in the market even no overhang with 30mm tanks. Whats more there is a LED flashlight control button on the battery door which supports the device used as a flashlight. IJOY Genie PD270 is a critically acclaimed platform for users looking for a cool, magic and exquisite device.
Tank:
The IJOY Captain S Sub Ohm Tank is a 25mm tank that features a specially designed groove located below the juice reservoir and right above the coil placement. This result in a reduction in heat transmission route and helps prevent the entire structure from heating up during extended use. And a new thread-less coil system for easy coil replacement. The Captain S sub ohm Tank is conveniently filled via the sliding top cap. Bring you the smoothest airflow and the best flavor!
Please note: this mod kit comes with 2 x 20700 batteries.

Original Vandy Vape Kanthal A1 Mesh Wire DIY Heating Wire for Mesh RDA $9.99
The Original Vandy Vape Mesh Wire is made from Kanthal A1 wires with 10mm by 40mm size. It is designed for Vandy Vape Mesh RDA and is super easy to build. The mesh wire comes with 2.8 ohm per feet, totally 5 feet in length.
This product comes with 80 mesh wires in 1 pack.This item also has several different packs and parameters to choose.

Original Vandy Vape SS316L Mesh Wire DIY Heating Wire for Mesh RDA $9.99
The Original Vandy Vape Mesh Wire is made from SS316L wires with 10mm by 40mm size. It is designed for Vandy Vape Mesh RDA and is super easy to build. The mesh wire comes with 1.2 ohm per feet, totally 5 feet in length.
This product comes with 200 mesh wires in 1 pack.This item also has several different packs and parameters to choose.

Original Vandy Vape Ni80 Mesh Wire DIY Heating Wire for Mesh RDA $9.99
The Original Vandy Vape Mesh Wire is made from Ni80 wires with 10mm by 40mm size. It is designed for Vandy Vape Mesh RDA and is super easy to build. The mesh wire comes with 1.8 ohm per feet, totally 5 feet in length.
This product comes with 100 mesh wires in 1 pack.This item also has several different packs and parameters to choose.

Original Demon Killer Flame Coil N80 A Pre-built Heating Wire for DIY $2.99
The Original Demon Killer Flame Coil Heating Wire is made from Nichrome 80 wires and features 0.4 ohm. This pre-coiled heating wire comes with 28GA x 2 + 38GA coils. This heating wire will be a good vaping choice for DIY.
This product comes with 6 PCS in 1 pack.This item also has several different packs and parameters to choose.

Original Demon Killer Flame Coil N80 6 in 1 Pre-built Heating Wire Kit $7.99
The Original Demon Killer Flame Coil 6 in 1 Heating Wire kit is made from Nichrome 80 wires, including Flame Coil A, 0.4 ohm, 28GA x 2 + 38GA; Flame Coil B, 0.3 ohm, 28GA x 3 + 38GA; Flame Coil C, 0.4 ohm, (28GA x 2) + 38GA; Flame Coil D, 0.12 ohm, 26GA x 3 + 38GA; Flame Coil E, 0.2 ohm, 26GA x 2 + 38GA; Flame Coil F, 0.3 ohm, (26GA x 2) + 38GA.
This product comes with 6 types of coils, totally 24 PCS in 1 pack.This item also has several different packs and parameters to choose.

Original Demon Killer Flame Wire N80 B Heating Wire for DIY $6.29
The Original Demon Killer Flame Wire is perfect for RBA / RTA / RDA atomizers. The heating wire is made from Nichrome 80 and comes with 28GA x 3 + 38GA wires, which will be a good choice for DIY. The kit comes with one allen key and one coil jig.This item also has several different packs and parameters to choose.

Original Uwell Valyrian Coil Head for Valyrian Sub Ohm Tank Atomizer $7.99
The Original Uwell Valyrian Coil Head features 0.15ohm resistance and rated for 95~120W. It is suitable for Valyrian Sub Ohm Tank Atomizer.
Please note: this product comes with 2 PCS in 1 pack.

Original Sigelei Kaos Z 200W TC VW Variable Wattage Box Mod $51.99
Sigelei keeps amazing us. The Original Sigelei Kaos Z 200W TC VW Box Mod is a powerful variable wattage mod with sleek design. You can see the internal through transparent side panels. A Sigelei manufactured microchip has greater performance to monitor your vape output. Powered by 2 x 18650 batteries, the variable wattage range is from 10 to 200 watts, while the temperature control range is 100~300'C / 200~570'F. The Kaos Z comes with changeable LED light with breathing effect. The USB port supports both charging and upgrading.This item also has many color to choose.

Sherman RDA Rebuildable Dripping Atomizer Clone with BF Pin $10.99
The Sherman RDA Clone is constructed from stainless steel in 28mm diameter. It comes with a two-post clamp style build deck and redirected bottom airflow. The RDA is designed for large coils. There is a wide build deck with two large clamp style posts and redirected airflow channels that are raised above the juice well for enhanced flavor production. The RDA features an adjustable bottom airflow control ring and comes with a wide bore 810 drip tip.This item also has many color to choose.
This RDA comes with bottom feeder pin.

PTI RTA Rebuildable Tank Atomizer Clone $12.99
The PTI RTA Clone is constructed from 24K gold plated 316 stainless steel in 24mm diameter. It features 3ml capacity and postless deck design to allow for easy building. The post clamps on the RTA use wide clamping holes to fit complex and large builds, while maintaining an easy to wick design. It comes with bottom adjustable airflow and wide bore drip tip. The knurled top cap and bottom ring make it easy to disassemble the tank.This item also has many color to choose.

LieFeng Comet RDA Rebuildable Dripping Atomizer Clone with BF Pin $14.99
The LieFeng Comet BF Capable RDA Clone is constructed from 316 stainless steel in 22mm diameter. The easy-to-build two post clamp design is for single coil use with large air flow intakes that hit the coil on both sides, producing extremely dense and smooth vapor. It comes with a removable POM drip tip.
The RDA comes with bottom feeder pin.

Le Papillon Lepapillon RDA Rebuildable Dripping Atomizer Clone with BF Pin $8.99
The Le Papillon RDA Clone is a mini size rebuildable dripping atomizer that is constructed from stainless steel in 16mm diameter. It features a two post build deck for single coil and top airflow system. It comes with removable drip tip. All parts of the RDA are detachable, making it very easy to maintain and clean.
This RDA comes with bottom feeder pin.

Reload RTA Rebuildable Tank Atomizer Clone with Bubble Tank $10.99
The Reload RTA Clone is constructed from stainless steel in 24mm diameter with 3.5ml capacity. It features post-less deck design for single or dual coil build and gold-plated 510 positive pin. Comes with bottom side adjustable air slots for airflow control, you can enjoy better flavor and cloud. The RDA comes with a wide bore ULTEM 810 drip tip.
The RTA comes with one normal tank and one bubble tank.This item also has many color to choose.

Original Centsu Vape Hanglee Hybrid Mechanical Mod + Hanglee RDA Kit $31.99
The mod kit comes with one Hanglee Hybrid Mechanical Mod and one Hanglee RDA.This item also has many color to choose.
Mod:
Designed and manufactured by Centsu Vape, the Hanglee mechanical mod features deep 'V' groove design, hybrid connection and 25mm diameter. The fire button comes with magnets and the bottom side comes with venting holes. The engraved text and brand plate are shown as on the image. The mod is powered by 1 x 18650 battery (not included).
RDA:
The Hanglee RDA is constructed from stainless steel in 25mm diameter. It features easy-to-build build deck with two clamp style posts. Each post has one large slotted screw on top, so it will be so convenient to build coils. The RDA comes with side adjustable airflow. With protruding center pin, it is hybrid safe. The RDA comes with wide bore drip tip.

SXK Replacement Top Cap Sleeve for Armor 1.0 RDA Clone $6.00
The replacement top cap sleeve is made from PEI with 22mm diameter and 18mm height. It is suitable for SXK Armor 1.0 RDA Clone.

YFTK Replacement Top Cap Sleeve for Pico V2 RTA Clone $2.99
The replacement top cap sleeve is made from PC with 22mm diameter and 25mm height. It is suitable for YFTK Pico V2 RTA Clone.This item also has many color to choose.

Original Hugo Vapor Boxer V2.0 188W TC VW Variable Wattage Box Mod $41.99
The Original Hugo Vapor Boxer V2.0, which features with ergonomic patented design, advanced self-designed chipset 188W maximum output wattage, supporting temperature control mode (Ni200, Ti01, SS316L) and wattage mode (Kanthal wire). The Boxer is powered by 2 x 18650 batteries (not included). It will bring more power and better vaping experience to your vaping life.

Get Low Mods GLM Hybrid Mechanical Mod Clone $20.99
The Get Low Mods GLM Mechanical Mod Clone is a hybrid mechanical mod constructed from brass with beautiful design. The top and bottom of the tube is wider than middle part. There are six grooves on both top side and bottom side. It is powered by 1 x 18650 battery (not included). The mod comes with spring fire button and series number on it.This item also has many color to choose.
Please Note: This mod is without anti-oxidation process, please don't touch it with hands directly.

Original Hcigar VT75D 75W TC VW Variable Wattage Box Mod $109.00
Coming with brand new Evolv DNA 75 Color chipset, the Hcigar VT75D 75W Box Mod is powered by single or dual 18650 batteries. VT75D Box Mod can reach up to a maximum output power of 75W. The temperature control mode includes Ni200, Ti and SS, and the TC range is 100~300'C / 200~600'F. The VT75D has multiple protection like the low voltage protection, low resistance protection, short circuit protection, high temperature protection, reverse battery protection. The VT75D can configure the setting via the Escribe software on PC.
This item also has many color to choose.

Original Laisimo 200 Spider 200W TC VW Variable Wattage Box Mod $50.99
With ergonomic design, the authentic Lasimo 200 Spider TC VW box mod is aiming to fit compactly in your hand. Constructed from high-quality zinc alloy, the slim body gives you comfortable feeling when holding in hand. Painting finish gives you a shiny look and soft feeling. Powered by 2 x 18650 batteries, the 200 Spider can reach maximum output wattage up to 200W. The OLED screen makes vaping data easy-to-read with its visual effect and high grade apperarance. The 200 Spider will bring you great vaping experience.This item also has many color to choose.

Kindbright H24 RDA Rebuildable Dripping Atomizer Clone with BF Pin $11.99
The Kindbright H24 RDA is constructed from 316 stainless steel in 24mm diameter. It features large build deck with two posts. The juice reservoir is deep enough to store e-juice. The middle side comes with AFC rings (two included in the kit) to control airflow. It is compatible with 810 wide bore drip tip.
The RDA comes with bottom feeder pin.

Original Godria Bolt RDA Rebuildable Dripping Atomizer with BF Pin $29.90
Godria brings a classic pro comp RDA, an ultimate cloud beast, the authentic Godria Bolt RDA is the world first RDA utilizes spring loaded dual clamp style posts. Bolt RDA features a 24K gold plated deck and contact pin, durable PEI 810 drip tip and 6.5mm deep juice well. It is designed for easy vaping. With the wide deck, you can operate pro coils in the best way. The dual airflow from both bottom and the side hit directly to coils. The Bolt comes with hybrid BF pin for squonk mod.This item also has many color to choose.

Original Joyetech CuBox AIO 50W 2000mAh All-in-One Starter Kit $29.99
Here comes another friendly starter kit that Joyetech brings to us. Being all-in-one style, the Joyetech CuBox AIO starter kit skillfully integrates a built-in battery and tank into one solid unit. It adopts the anti-leaking structure with top fill and top airflow control system. This compact all-in-one unit features an elegant and visually stunning design, making it one of a kind starter kit. The shining indicator light shows the battery life once you click the button. With the new ProC-BF series head, it provides a more restricted draw and pretty soft flavorful clouds for mouth-to-lung vapers.This item also has many color to choose.

Get Low Mods GLM Hybrid Mechanical Mod Clone + Apocalypse GEN 2 RDA Clone Kit $27.99
The mod kit comes with one Get Low Mods GLM Mechanical Mod Clone and one Apocalypse Gen 2 RDA Clone.This item also has many color to choose.
Mod:
The Get Low Mods GLM Mechanical Mod Clone is a hybrid mechanical mod constructed from copper with beautiful design. The top and bottom of the tube is wider than middle part. There are six grooves on both top side and bottom side. It is powered by 1 x 18650 battery (not included). The mod comes with spring fire button and series number on it.
RDA:
The Apocalypse Gen 2 RDA Clone is with clamp design and has a massive 13mm space in each clamp which provides space for mounting the most complex and insane coil builds. The RDA is constructed from copper (cap) and stainless steel (base) with resin drip tip.Coupled with the 4mm deep juice well, 21mm build deck, durable post clamps and extended post screws, the Apocalypse Gen 2 Style RDA is a builder's dream. This RDA comes with bottom feeder pin for squonk mod.
Please Note: This mod is without anti-oxidation process, please don't touch it with hands directly.

VGOD Elite Hybrid Mechanical Mod Clone + VGOD Pro Drip RDA Clone Kit $20.99
The mod kit comes with one VGOD Elite Style Mechanical Mod and one Pro Drip style RDA.This item also has many color to choose.
Mod:
The VGOD Elite Style Mechanical Mod features a "flare grip" chassis with hard hitting stainless steel construction. A 510 hybrid connection, copper contact, along with a copper framed aerospace grade carbon fiber switch, ensures you get the maximum voltage performance and look good while doing it. The mod is Zinc alloy plated.

RDA:
The VGOD Pro Drip style RDA features 24mm diameter with a dual vertical post design with 2-holes per post for an easy and well-designed post set-up. The VGOD Pro Drip style RDA features durable stainless steel construction as well as unmatched precision when designing the RDA to ensure a flush and un-compromised fit. Featuring dual bottom airflow with direct coil flow ensures a flavorful and vaporful experience every time. A low profile e-juice well is implemented to ensure no over-dripping will leave your RDA.

Original AWT C2 2A Quick Charge Intelligent Battery Charger $9.99
The Original AWT C2 Charger is a good charger for your batteries. Once inserting, AWT C2 Charger detects your battery automatically. It supports 2A quick charging. The chargers supports the following batteries: 10440, 10670, 16340, 14500, 18350, 18490, 18500, 18650, 26650, etc. The charger comes with two charging slots.

Original GOLISI S2 1A Quick Charge Intelligent Battery Charger $19.99
GOLISI S2 comes with an upgraded smart chip which enables the large LCD screen to show clearly the charging status. The chip can detect battery types and quantity, and charge batteries independently or simultaneously. The smart charger supports different cells charging at the same time. It comes with two battery slots for charging.
Please note: this charger is with US plug.

Original GOLISI S4 1A Quick Charge Intelligent Battery Charger $24.99
GOLISI S4 can holds more batteries than the S2. It comes with an upgraded smart chip which enables the large LCD screen to show clearly the charging status. The chip can detect battery types and quantity, and charge batteries independently or simultaneously. The smart charger supports different cells charging at the same time. It comes with four battery slots for charging.
Please note: this charger is with US plug.

Original GOLISI L4 2A Quick Charge Intelligent Battery Charger $25.99
The GOLISI L4 is one of the world's most advanced automatic digital charger. The Intelligent Digi Charger L4 is a universal, automatic smart-charger compatible with almost all types of rechargeable batteries, thus eliminating the need to own several chargers. The L4 is able to automatically detect 3.7V Li-ion, Ni-MH and Ni-Cd rechargeable batteries. Through manual selection, it is also capable of charging LiFePO4 and 3.8V Li-ion batteries. Intelligent circuitry selects the optimal charging mode (CC, CV and dV / dt) for a giving battery and each of L4's two microcomputer-controlled charging slots then monitor and charge the battery independently. Furthermore, an integrated digital LCD screen clearly displays all charging parameters and progress while an intelligent automatic power-off function terminates current when charging is complete.
Please note: this charger is with US plug.

Original Black Widow 3.7V 40A 3500mAh 18650 High Drain Rechargeable Battery $13.99
The Original Black Widow 18650 Battery, featuring a diameter of 18mm and a length of 65mm, has a 3500mAh large battery capacity with 40A max continuous discharging current. Black Widow battery has excellent safety performance: overcharge, over-discharge, overload and over heat protection. High capacity, low inner resistance, long cycle life, low self-discharge. Strong current charge and discharge capability reached IEC standard.
This product comes with 2 PCS in 1 pack.

Original AWT 3.7V 50A 3000mAh IMR 18650 High Drain Rechargeable Battery $14.99
The Original AWT 18650 Battery, featuring a diameter of 18mm and a length of 65mm, has a 3000mAh large battery capacity with 50A max continuous discharging current and a cycle life of over 1,000. The AWT 18650 battery is perfectly suitable for mechanical mods and sub-ohm builds.
This product comes with 2 PCS in 1 pack.

SXK 60W TC Temperature Control VW Variable Wattage Box Mod Original Price $55.99,Now Only $14.99
The SXK 60W box mod is constructed from aluminum. The mod features output wattage range that is from 1 to 60W and the temperature range is from 200 to 600 degrees Fahrenheit. The mod comes with bottom screen display and is suitable for 24mm diameter atomizer. It is powered by 1 x 18650 battery (parallel, not included).

Battle Master Mechanical Mod Clone with Extended Battery Tube $19.99
The Battle Master Mechanical Mod Clone is constructed from brass (mod) and POM (sleeve). It comes with an extended battery tube, making it possible to utilize dual 18650 batteries to produce more massive clouds. Single battery works well too. The POM sleeve protects the mod from damage and helps vapers to insulate heat from the mod.

VGOD Elite Hybrid Mechanical Mod Clone $12.99
The VGOD Elite Mechanical Mod Clone features a "flare grip" chassis with hard hitting stainless steel construction. A 510 hybrid connection, copper contact, along with a copper framed aerospace grade carbon fiber switch, ensures you get the maximum voltage performance and look good while doing it.This item also has many color to choose.
The mod is Zinc alloy plated.

VGOD Pro Drip RDA Rebuildable Dripping Atomizer Clone $5.99
The VGOD Pro Drip RDA Clone features 24mm diameter with a dual vertical post design with 2-holes per post for an easy and well-designed post set-up. The VGOD Pro Drip style RDA features durable stainless steel construction as well as unmatched precision when designing the RDA to ensure a flush and un-compromised fit. Featuring dual bottom airflow with direct coil flow ensures a flavorful and vaporful experience every time. A low profile e-juice well is implemented to ensure no over-dripping will leave your RDA.This item also has many color to choose.

VGod TrickTank Pro RDTA Rebuildable Dripping Tank Atomizer Clone $7.99
The Tricktank PRO RDTA Clone features a large dual post style rebuildable deck for easy dual coil installation. Constructed from stainless steel and glass tank, The RDTA also features a 4ml e-juice capacity with a convenient side fill hole and large dual airflow channels that feed directly towards the coils for a constant and direct coil airflow, providing maximum flavor and massive vapor production.This item also has many color to choose.

Original Centsu Vape Hanglee RDA Rebuildable Dripping Atomizer $9.99
The Hanglee RDA is constructed from stainless steel in 25mm diameter. It features easy-to-build build deck with two clamp style posts. Each post has one large slotted screw on top, so it will be so convenient to build coils. The RDA comes with side adjustable airflow. With protruding center pin, it is hybrid safe. The RDA comes with wide bore drip tip.This item also has many color to choose.

SXK Pico V2 RTA Rebuildable Tank Atomizer Clone $19.90
The SXK Pico V2 RTA Clone is constructed from 316 stainless steel, PEI tank sleeve and PEEK chimney. The 22mm RTA utilizes new build deck design with air hole and new cross chamber design to produce maximum flavor. The RTA comes with 3ml capacity and a removable PEI 510 drip tip.

Ulton SQ Emotion RTA Rebuildable Tank Atomizer Clone $36.99
The Ulton SQ Emotion RTA is constructed from 316 stainless steel in 22mm diameter. It has 4.5ml large capacity and one innovative top cap, which is a top-fill three position top cap. You can rotate the cap and get the juice fill holes open and refill without removing any parts. When finished, you can close the holes by adjusting the cap again. The postless build deck supports single or dual coil with interchangeable decks (single and dual coil version decks included). With its excellent design, the tank can be completely closed and removed even it is full, and the deck is accessible even with full tank. The RTA comes with bottom airflow with 4mm airslots. 510 drip tip is included for the tank.

VGOD Elite Hybrid Mechanical Mod Clone + VGOD Pro Drip RDA Clone Kit $17.99
The mod kit comes with one VGOD Elite Mechanical Mod Clone and one Pro Drip style RDA.This item also has many color to choose.
Mod:
The VGOD Elite Style Mechanical Mod features a "flare grip" chassis with hard hitting stainless steel construction. A 510 hybrid connection, copper contact, along with a copper framed aerospace grade carbon fiber switch, ensures you get the maximum voltage performance and look good while doing it.
The mod is Zinc alloy plated.

RDA:
The VGOD Pro Drip RDA Clone features 24mm diameter with a dual vertical post design with 2-holes per post for an easy and well-designed post set-up. The VGOD Pro Drip style RDA features durable stainless steel construction as well as unmatched precision when designing the RDA to ensure a flush and un-compromised fit. Featuring dual bottom airflow with direct coil flow ensures a flavorful and vaporful experience every time. A low profile e-juice well is implemented to ensure no over-dripping will leave your RDA.

VGOD Elite Hybrid Mechanical Mod Clone + VGOD TrickTank Pro RDTA Clone Kit $18.99
The mod kit comes with one VGOD Elite Mechanical Mod Clone and one Tricktank PRO style RDTA.This item also has many color to choose.
Mod:
The VGOD Elite Style Mechanical Mod features a "flare grip" chassis with hard hitting stainless steel construction. A 510 hybrid connection, copper contact, along with a copper framed aerospace grade carbon fiber switch, ensures you get the maximum voltage performance and look good while doing it.
The mod is Zinc alloy plated.

Tank:
The Tricktank PRO RDTA Clone features a large dual post style rebuildable deck for easy dual coil installation. Constructed from stainless steel and glass tank, the RDTA also features a 4ml e-juice capacity with a convenient side fill hole and large dual airflow channels that feed directly towards the coils for a constant and direct coil airflow, providing maximum flavor and massive vapor production.

510 Heat Dissipation Insulator Heat Sink for RDA / RTA / Sub Ohm Tank Atomizer $1.59
This heat dissipation insulator is made from stainless steel with copper pin. It is installed between mod and atomizer to insulate heat between mod and atomizer, and it can be a decorative ring for your device.

Original Magic Shark Replacement Bearing for Hand Spinner Fidget Toy $2.59
The Original Magic Shark Replacement Bearing is made from high quality stainless steel and it is R188 bearing. With soundless feature, it is suitable for hand spinners like the Magic Shark Soul Eater, Hive, Time Machine, etc.
This product will be shipped with one piece (1 PC).

Original Magic Shark Replacement Bearing for Hand Spinner Fidget Toy $20.99
The Original Magic Shark Replacement Bearing is made from high quality stainless steel and it is R188 bearing. With soundless feature, it is suitable for hand spinners like the Magic Shark Soul Eater, Hive, Time Machine, etc.
This product will be shipped with ten piece (10 PCS).

Spine Hybrid Mechnical Box Mod Clone Original Price $21.99,Now Only $16.99
The Spine Style Hybrid Mechnical Box Mod is constructed from brass inner tube and Delrin body with resin sides. It is a hybrid mod with 510 connection and comes with copper contacts including the battery cap, which has venting holes on it. The large fire button on the side is made from Ultem material. The smart design makes the mod fit your hand and give it a nice look at the same time. The box mod is powered by 1 x 18650 battery (not included).This item also has a black color to choose.
The resin part is in random color.

O-Atty V2 RDA Rebuildable Dripping Atomizer Clone with BF Pin $8.39
The O-Atty V2 RDA Clone is constructed from stainless steel in 22mm diameter. It comes with simple design but with a quad-post build deck for flexible coil building, supporting both single and dual coils. The RDA comes with middle side adjustable airflow and removable drip tip.
The RDA comes with bottom feeder pin.This item also has a 24 diameter version to choose.

Gambit RDA Rebuildable Dripping Atomizer Clone with BF Pin $10.99
The Gambit RDA Clone is constructed from 316 stainless steel in 22mm diameter. It features a easy-to-build deck with two posts and top slotted screws. With the deck, you can easily build a single coil. The RDA comes with adjustable airflow design with two airslots on the cap. The protruding pin makes it hybrid safe. The RDA comes with two caps (SS, PC) and two drip tips (Delrin, PEI).
This RDA comes with bottom feeder pin.

Original Vandy Vape Berserker MTL RTA Rebuildable Tank Atomizer $28.99
The Original Vandy Vape Berserker MTL RTA is the latest mouth-to-lung tank atomizer from Vandy Vape. It features 24mm diameter, changeable capacity from 2.0ml to 4.5ml, multiple sizes of airholes, etc. The airholes comes with 5 sizes, 0.1mm, 1.0mm, 1.2mm, 1.4mm, and 1.6mm, making it possible to experience a real cigarette tightening. The build deck with two posts supports single coil. Top fill design makes refilling easier. Ultem 510 drip tip and extra Delrin drip tip included for this tank.This item also has many color to choose.

Replacement 810 Drip Tip for TFV8 / TFV12 Tank / Kennedy / 528 Goon RDA $2.99
The 810 drip tip is made from resin in 16.5mm height. It is suitable for TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.
This drip tip will be shipped in random color (one piece), more options than what's on the image.


Original Wotofo Shield the Protection Adapter for Mechanical Mod $22.99
The first protection adapter for mechanical mod, Wotofo Shield the Protection Adapter, is made from brass with gold plated contact pin. It is 24mm in diameter with 510 threading connection. It can provide multiple protections for your mech mod, like the short circuit protection, battery protection, over output current protection, over output voltage protection, low output voltage protection and output anti-reverse protection. The adapter can help you with much safer vaping!

Original Sigelei Fuchai Vcigo K2 175W TC VW Variable Wattage Box Mod $30.99
The Original Sigelei Fuchai Vcigo K2 175W TC VW Box Mod features stylish design with double fire buttons and changeable bottom color stripe. Powered by 2 x 18650 batteries, the wattage range can vary from 10 to 175W. It also comes with voltage regulation mode to adjust voltage. The temperature range is 100~300'C / 200~570'F. Vcigo K2 has five working modes, including POWER, SS (304 / 316 / 317), Ti1, Ni200 and TCR.This item also has many color to choose.

Oil Storage Bottom Feeder Squonk Mechanical Box Mod Clone $11.99
The Oil Storage Bottom Feeder Squonk Box Mod comes with very compact design. The mod is made from high quality thermal resistant material and stainless steel connector. With the inner bottle, it is no need to refill the atomizer frequently. The battery door can be attached to the mod well, it is not magnetic though. This mod is powered by 1 x 18650 battery (not included) and supports 22mm diameter BF RDA / RTA.

SXK VF Style 30W VW Variable Wattage Box Mod $13.99
The SXK VF Style box mod is constructed from aluminum with rubber paint finish. With touch feeling design, the hand feeling is very comfortable. The output wattage range is from 7 to 30W. The mod comes with top screen display and is suitable for 22mm diameter atomizer. It is powered by 2 x 18650 batteries (parallel, not included).

Original Vapjoy Viper BF RDA Rebuildable Dripping Atomizer w/ Squonk Pin $11.99
The Authentic Vapjoy Viper BF RDA is a 24mm diameter dripper constructed from aluminum (cap) and stainless steel (base). VIPER BF RDA features dual post design aiming to fit large builds. Additional post holes are available for smaller coils set-up. It has 7mm deep juice well for holding e-juice. The RDA comes with side blade style adjust airflow control and a beautiful 810 resin drip tip.This item also has many color to choose.
This RDA comes with bottom feeder pin and the drip tip included is random color.

Original Sigelei Fuchai Vcigo K2 175W TC VW Variable Wattage Box Mod + Cubic RDA Kit $40.99
The mod kit comes with Fuchai Vcigo K2 175W mod and Cubic RDA atomizer.This item also has many color to choose.
Mod:
The Authentic Sigelei Fuchai Vcigo K2 175W TC VW Box Mod features stylish design with double fire buttons and changeable bottom color stripe. Powered by 2 x 18650 batteries, the wattage range can vary from 10 to 175W. It also comes with voltage regulation mode to adjust voltage. The temperature range is 100~300'C / 200~570'F. Vcigo K2 has five working modes, including POWER, SS (304 / 316 / 317), Ti1, Ni200 and TCR.
RDA:
The Cubic RDA has a special cube shape with super wide bore drip tip. You can even refill e-juice through the drip tip without removing it. It features middle side adjustable airflow and two posts easy-to-build deck.

Oil Storage Bottom Feeder Squonk Mechanical Box Mod Clone + BF RDA Kit $14.99
The mod kit is consist of one Oil Storage squonk box mod and one BF RDA.
Mod:
The Oil Storage Bottom Feeder Squonk Box Mod comes with very compact design. The mod is made from high quality thermal resistant material and stainless steel connector. With the inner bottle, it is no need to refill the atomizer frequently. The battery door can be attached to the mod well, it is not magnetic though. This mod is powered by 1 x 18650 battery (not included) and supports 22mm diameter BF RDA / RTA.
RDA:
The BF RDA is constructed from stainless steel in 22mm diameter. The RDA is mini size but the build deck is very wide for building. The two posts style deck allows vapers to build dual coil. The RDA features side adjustable airflow with two airslots on the cap. The drip tip is not regular type with 13mm diameter connector.
The RDA comes with bottom feeder pin and fits squonk mods.

Coppervape Replacement Tank for Taifun GT III RTA Atomizer $1.49
The replacement tank is made from Pyrex glass and is suitable for Coppervape Taifun GT III RTA Clone. It has 5ml e-juice capacity.

YFTK Replacement Cap Sleeve + Drip Tip for O-Atty RDA $11.99
The replacement cap and drip tip are made from PEI and is suitable for YFTK O-Atty RDA Clone. The drip tip is 510 drip tip with 11mm height.

Original IJOY Captain PD270 234W 3000mAh TC VW Variable Wattage Mod $50.99
IJOY Captain PD270 holds dual 20700 batteries, and compatible with dual 18650 batteries, up to 234W, and no overhang with 30mm tanks, however a super compact size, feels good in hand and easy to carry, IJOY PD270 is the inevitable choice for every single vapers!
IJOY PD270, P on behalf of the high performance, D on behalf of the dual batteries, 270 on behalf of 20700 batteries. The 20700 batteries are selected by a famous car corporation to replace the 18650 battery, representing high quality and stable performance. IJOY believes that 20700 will replace 18650 and be the future in Vaping industry.This item also has many color to choose.
This mod comes with 2 x 20700 batteries.

Original IJOY Captain PD270 234W TC VW Variable Wattage Mod $35.69
IJOY Captain PD270 holds dual 20700 batteries, and compatible with dual 18650 batteries, up to 234W, and no overhang with 30mm tanks, however a super compact size, feels good in hand and easy to carry, IJOY PD270 is the inevitable choice for every single vapers!
IJOY PD270, P on behalf of the high performance, D on behalf of the dual batteries, 270 on behalf of 20700 batteries. The 20700 batteries are selected by a famous car corporation to replace the 18650 battery, representing high quality and stable performance. IJOY believes that 20700 will replace 18650 and be the future in Vaping industry.This item also has many color to choose.
There is no battery included for this mod.

Rogue Hybrid Mechanical Mod Clone $14.99
The Rogue Mechanical Mod Clone is constructed from brass in 24mm diameter. It is powered by 1 x 18650 battery (not included). It features 510 threading hybrid connection, side venting holes and magnet fire button. There is series number on the mod.This item also has many color to choose.

Oil Storage Bottom Feeder Squonk Mechanical Box Mod Clone $11.99
The Oil Storage Bottom Feeder Squonk Box Mod comes with very compact design. The mod is made from high quality thermal resistant material and stainless steel connector. With the inner bottle, it is no need to refill the atomizer frequently. The battery door can be attached to the mod well, it is not magnetic though. This mod is powered by 1 x 18650 battery (not included) and supports 22mm diameter BF RDA / RTA.This item also has many color to choose.
10ml PET Bottle

Original ThinkVape Finder 75W TC VW Variable Wattage Box Mod $86.99
Designed by ThinkVape, Powered by Evolv DNA 75C chip from USA, the authentic ThinkVape Finder 75W TC VW Box Mod can reach up to 75W. With major part constructed from zinc alloy and half wrapped genuine leather, the mod has a good feeling in hands. The 0.91" colorful TFT screen displays vaping datas clearly. The temperature range is 100~300'C / 200~600'F. Finder 75 is powered by 2 x 18650 batteries (not included).This item also has many color to choose.

Original Hcigar Towis T180 180W TC VW Variable Wattage Box Mod $98.99
Hcigar Towis T180 mod features newest chipset XT180 and the convenient touch screen design, which makes it different from Hcigar's traditional box mods. It is powered by dual 18650 batteries and able to reach up to a maximum output power of 180W. Towis T180 has multiple protections, including short circuit protection, reverse battery protection, low resistance protection, high temperature protection, etc.This item also has many color to choose.

LieFeng NextEra RTA Rebuildable Dripping Atomizer Clone with BF Pin $18.99
The LieFeng NextEra Style RTA is constructed from 316 stainless steel in 22mm diameter. It features 8-position AFC ring and single post build deck for single coil building. It comes with 2ml capacity.
This RTA Comes with bottom feeder pin.

O-Atty V2 RDA Rebuildable Dripping Atomizer Clone with BF Pin $8.39
The O-Atty V2 RDA Clone is constructed from 304F stainless steel in 22mm diameter. It comes with simple design but with a quad-post build deck for flexible coil building, supporting both single and dual coils. The RDA comes with middle side adjustable airflow and removable drip tip.
The RDA comes with bottom feeder pin.This item also has many color and a 24mm version to choose.

Eddy RDA Rebuildable Dripping Atomizer Clone $8.19
The Eddy RDA Clone is constructed from brass (cap) and stainless steel (base) in 25mm diameter. It features Dual posts build deck with one large slotted screw on each post. The cap has two airslots for the side adjustable airflow.This item also has another material to choose.

The Double Cross RDA Rebuildable Dripping Atomizer Clone $8.39
The Double Cross RDA Clone is constructed from brass (cap) and stainless steel (base) in 25mm diameter. It features Dual posts build deck with one large slotted screw on each post. The cap has two airslots for the side adjustable airflow.This item also has another material to choose.

Eddy Mechanical Mod Clone + Eddy RDA Clone Kit $22.69
The mod kit comes with Eddy mechanical mod Clone and Eddy RDA Clone.This item also has many color to choose.
Mod:
The Eddy Mechanical Mod Clone is constructed from copper and powered by 1 x 18650 battery (not included). Comes with the unique vortex shape, this mod will bring an amazing vaping experience to your vaping life! The maximum diameter is 25mm.
RDA:
The Eddy RDA Clone is constructed from copper (cap) and stainless steel (base) in 25mm diameter. It features two posts build deck with one large slotted screw on each post. The cap has two airslots for the side adjustable airflow.

The Double Cross Mechanical Mod Clone + Double Cross RDA Clone Kit $23.39
The mod kit comes with Double Cross style mechanical mod and Double Cross Style RDA.
Mod:
The Double Cross Style Mechanical Mod is constructed from copper and powered by 1 x 18650 battery (not included). Comes with the unique double cross shape, this mod will bring an amazing vaping experience to your vaping life! The maximum diameter is 25mm.
RDA:
The Double Cross Style RDA is constructed from copper (cap) and stainless steel (base) in 25mm diameter. It features two posts build deck with one large slotted screw on each post. The cap has two airslots for the side adjustable airflow.

PVC Wrapper Skin Sticker for 18650 Battery $1.49
The wrapper sticker is commonly used for 18650 battery, Like LG MH1, LG HB6, Samsung ICR18650-26F, Samsung INR18650 batteries, etc. It comes with Game of Thrones pattern.This item also has many pattern to choose.
This product comes with 10 PCS in one pack.

510 Flat Mouthpiece Drip Tip for RDA / RTA / Sub Ohm Tank Atomizer $2.99
The replacement 510 drip tip is made from stainless steel in 14.5mm height. The mouthpiece is 10.5mm by 6mm. It comes with two silicone o-rings around the connector. It is suitable for RDA / RTA / Sub Ohm Tank that is compatible with 510 drip tip.This item also has many color to choose.

510 Heat Dissipation Insulator Heat Sink for RDA / RTA / Sub Ohm Tank Atomizer $2.59
This heat dissipation insulator is made from stainless steel with copper pin and PEEK insulator. It is installed between mod and atomizer to insulate heat between mod and atomizer, and it can be a decorative ring for your device.This item also has many color to choose.