3FVape - New products & Deals Update

[3FVape]

Original SY Group Lucifer Mechanical Vape Mod original price $99.99, now only $79.99
The Original SY Group Lucifer mechanical mod is constructed from brass in 24mm diameter, which is powered by single 18650 battery (Not included). It features knurled top hat with 510 threading connection.

Original Hellvape Destiny RTA Tank Vape Atomizer Replacement Straight Tank Tube $1.68
The Original Hellvape Replacement Straight Tank Tube is made of glass material, which features 2ml E-juice / E-liquid capacity and is designed for Hellvape Destiny RTA Tank Vape Atomizer as a replacement part.

Original Hellvape Destiny RTA Tank Vape Atomizer Replacement Bubble Tank Tube $1.99
The Original Hellvape Replacement Bubble Tank Tube is made of glass material, which features 4ml E-juice / E-liquid capacity and is designed for Hellvape Destiny RTA Tank Vape Atomizer as a replacement part.

Original Hellvape Destiny RTA Tank Vape Atomizer Replacement 810 Drip Tip $2.49
The Original Hellvape Replacement 810 Drip Tip is made of PEI material, which is designed for Hellvape Destiny RTA Tank Vape Atomizer as a replacement part.

Original Hellvape Destiny RTA Tank Vape Atomizer Replacement 810 Drip Tip $2.43
The Original Hellvape Replacement 810 Drip Tip is made of PC material, which is designed for Hellvape Destiny RTA Tank Vape Atomizer as a replacement part.

Kindbright Power Mosget Kick Chip for Mechanical Vape Mod $4.99
The Power Mosget Kick Chip is suitable fo Mechanical Vape Mod. It will automatically pause every 10 seconds of working. There are 4 types of protections to ensure that provide a safe vaping for you. (Short-circuit Protection, Battery Reverse Protection, Over Discharge Protection, Low Battery Voltage Protection)

[3FVape]

Original Auguse Era MTL RTA $33.99
The Original Auguse Era RTA Rebuildable Tank Atomizer is constructed from Stainless Steel (Body) and Glass (Tank Tube) in 22mm Diameter. The tank can hold 3ml e-juice capacity. This RTA supports close the juice hole. Era RTA comes with 4 screws, 2 airflow inserts (0.8mm), 2 airflow inserts (1.0mm), 2 airflow inserts (1.2mm). The RTA can change between the side airflow and bottom airflow. There is no distincion between positive and negative when installing the wire coil.

Original Advken OWL Mechanical Vape Mod + Tank Starter Kit original price $49.99, now only $35.99
The Original Advken OWL Starter Kit consists of Advken OWL Mechanical Mod and OWL Mesh Tank, which is top sliding refill and top airflow control, which is powered by 1 x 18650 / 20700 / 21700 Batteries (Not inlcluded). It comes with an adapter sleeve to accommodate smaller diameter batteries. OWL Kit comes with two types of coils (0.16ohm mesh coil / 0.2ohm mesh coil)for you, and the Advken Mesh Coil will bring you a good flavor, curved shape give you the better hand feeling. And the top airflow system can avoid leakage and condensation.

Original Advken Artha 80W VW Box Mod Pod System Vape Starter Kit original price $49.99, now only $44.99
The Original Artha VW Box Mod Pod System Vape Starter Kit is a compact, portable and fashionable pod mod system kit. It adopts 4.5ml large pod cartridge and 80W powerful ouput, which is able to provide you with long-lasting vaping. With convenient side filling design, it also chooses comfortable 510 drip tip. In addition, compatible with 0.3ohm / 0.8ohm mesh coil, it supports bottom air-intake for smooth and pure flavor. Besides, it is equipped with 0.42-inch OLED screen to display you details. And there are multiple protections to ensure your safety, like Over-load / short circuit protection, Overcharge protection, Over-temperature protection, Over-time protection (10s), Low voltage protection, and Anti-Reverse connection protection.

Original Vandy Vape Mato RDTA Vape Atomizer Replacement Steel Wire Guide Wick(4 PCS) $2.99
The Original Vandy Vape Replacement Steel Wire Guide Wick is specially designed for Vandy Vape Mato RDTA Vape Atomizer, which is made of stainless steel and features 3mm in diameter. And 4 steel wire brings you insane juicy flow. 4 PCS / Pack.

Original Vandy Vape Mato RDTA Vape Atomizer Replacement Triple Fused Clapton Coil(5 PCS) $1.99
The Original Triple Fused Clapton Coil is compatible with Vandy Vape Mato RDTA and other RBA / RDA / RTA / RDTA atomizer. It is made of Ni80 material and features 0.26ohm coil resistance and 26GA x 3 + 36GA. 5 PCS / Pack.

Disposable 3-Ply Standard Earloop Medical Surgical Facial Mask Particles Respirator Anti PM2.5 Dust / Bacteria /Virus(50 PCS) $38.99
The Disposable Standard 3-Ply Earloop Medical Surgical Facial Mask Face Mouth Masks is made of 1 ply Polypropylene spun-bond non-woven fabric (effectively isolates saliva etc.) + 1 ply Meltblown non-woven (filter non-oily particles in the air) + 1 ply Polypropylene spun-bond non-woven fabric (absorbing hot air exhaled from the body, bring comfort). It is with adjustable nose bar helps the mask close to face when wearing. The elastic ear-loops wears easily and comfortable.

Across Intan Grip Base Clone + MTL / DL Drip Tip Kit for SXK BB / Billet Box Vape Mod Kit $5.99
The Instan Grip Drip tip Kit Clone includes 1 instan hand screw grip drip tip base, 1 drip tip for MTL (hole 3mm), 1 drip tip for DL (hole 5mm). The grip drip tip base is made of stainless steel and drip tip is made of POM. It is suitable for SXK BB / Billet Box Vape Mod Kit.

Disposable 3-Ply Single-use Type Face Mask Particles Respirator with Nose Wire Anti PM2.5 Dust / Bacteria / Virus(50 PCS) $42.99
The Disposable 3-Ply Single-use Type with Nose Wire Face Mask is made of 1 ply Polypropylene spun-bond non-woven fabric + 1 ply Meltblown non-woven + 1 ply Polypropylene spun-bond non-woven fabric. It is with adjustable nose bar helps the mask close to face when wearing. The elastic ear-loops wears easily and comfortable.

[3FVape]

Original Oumier Voocean 40 40W 1200mAh VW Box Mod Pod System Vape Starter Kit original price $38.00, now only $29.80
The Voocean 40 Kit is constructed from Zinc Alloy electroplating and TPU material. Powered by a built-in 1200mAh battery and comes with 3.5ml e-juice capacity, it will provide you long-term vaping. It looks marble-like with 2 of the colors having purple tints and one grey. Its ergonomic handle grip offers great and comfortable user experience. There is a circular activation button, two adjustment key and a USB port in the control panel, so it is easy to navigate screen.

Original Hellvape Destiny RTA Tank Vape Atomzier Replacement Straight Tank Tube $2.59
The Original Hellvape Replacement Straight Tank Tube is made of PEI material, which features 2ml E-juice / E-liquid capacity and is designed for Hellvape Destiny RTA Tank Vape Atomizer as a replacement part.

Original Hellvape Destiny RTA Tank Vape Atomzier Replacement Straight Tank Tube $2.99
The Original Hellvape Replacement Straight Tank Tube is made of PCTG material, which features 2ml E-juice / E-liquid capacity and is designed for Hellvape Destiny RTA Tank Vape Atomizer as a replacement part.

Original Wismec R80 Pod System Vape Kit / Cartridge Replacement Bottom Airflow Control RBA Coil Head $9.99
The Original Wismec R80 replacement bottom airflow control RBA Coil Head is specially designed for Wismec R80 pod system vape kit / cartridge, which devotes to offering you DIY enjoyment and large vapor clouds. It comes with an open build space, you can easily install the coil. The bottom airflow system facilitates to dissipate the heat, conducive to produce a perfect taste. The Wismec R80 RBA Coil brings a wide option for coil selection and dense cloud.

Original AWT C4 Intelligent USB 4-Slot Fast Charging Charger for Li-ion / Ni-MH / Ni-CD Batteries $14.99
The Original AWT C4 Intelligent USB 4-Slot Fast Charging Charger is compatible with 10440, 10670, 16340, 14500, 18350, 18490, 18500, 18650, 26650 etc. Li-ion / Ni-MH / Ni-CD Batteries (Not included), which makes charging your batteries simple! AWTs C4 Charger automatically detects your battery after inserting and supports 2A charging for blazing fast speeds.

Original Efest Slim K1 USB Intelligent Charger for 14500 / 16650 / 17650 / 17670 / 18350 / 18500 / 18650 / 20700 / 26500 /26650 $6.99
The Original Efest Slim K1 Charger is a high quality Intelligent Charger with a cost-efficient and portable design. The Efest Slim K1 Charger is a single slot charger with Micro USB input and charges at 1A. The LED indicates when your battery is charging and when the battery is fully charged. The Efest Slim K1 Charger features reverse polarity, short circuit, overcharge protection and many more safety features. The Efest Slim K1 Charger can charge different types of 3.6V / 3.7V lithium batteries commonly used in electronic cigarettes, flashlights, electric tools, and more. It is compatible with 10440, 14500, 14650, 16340, 16650, 17650, 17670, 18350, 18490, 18500, 18650, 20700, 26500, 26650 Batteries (Not included)

Original Vandy Vape Kanthal Wire for RBA / RDA / RTA / RDTA Vape Atomizer $2.59
Original Vandy Vape Kanthal Wire is suitable for RBA / RDA / RTA / RDTA Vape Atomizer, which features elasticity that you can build easily with twist and braid. It is made of Kanthal A1 material, 22GA, 1.52ohm/ft, totally 15ft.

[Ships from Battery Warehouse] Original Golisi S30 IMR 18650 3000mAh 3.7V 35A Flat Top Rechargeable Battery(2 PCS) $14.99
The Original Golisi S30 IMR 18650 Battery, featuring a diameter of 18mm and a length of 65mm, has a 3000mAh large battery capacity with 35A max continuous discharging current. Long storage life, light weight and high energy density. 2 PCS / Pack.

Micro Coil Jig 5-Size Coil Building Rods for RBA / RDA / RTA /RDTA Vape Atomizer $2.59
The Micro Coil Jig 5-Size Coil Building Rods is suitable for RDA / RBA / RTA Rebuildable Atomizer, which is made of stainless steel and in 100mm length. There are 5 diameters can choose: 1.5mm, 2.0mm, 2.5mm, 3.0mm, 3.5mm. This micro coil jig is a compact and handy device for vapers who prefer building their own coils. The coil tool is easy to use: using the numbered guide on the handle of the tool, simply select your preferred size from five different diameters and begin wrapping until you have achieved the desired number of wraps.

[3FVape]

Armor Mech V2 BF Bottom Feeder Squonk Mechanical Box Vape Mod Clone original price $65.00, now only $55.00
The Armor Mech V2 Mechanical Box Vape Mod Clone is a BF Squonk Mechanical Mod, which comes with side fire button, and custom bottle system. A 24mm inset catch cup surrounds the 510 connector, and an included matching 22mm insert ring allows users to seat either a 22mm or 24mm diameter atomizer into the top plate, or flip the ring for a completely flush mounting surface for larger diameter atomizers and beauty rings.

YFTK Taifun GT4 S DL RTA Clone $24.99
The YFTK Taifun GT4 S DL RTA Rebuildable Tank Atomzier Clone is constructed from 316 Stainless Steel (Body) and PSU (Tank Tube) in 23mm diameter. The RTA comes with a 3.5ml e-juice capacity tank. The air duct system bringing air flow via the poles in the chamber and adjustable AFC from the outside. And it can offer a slightly restricted direct lung hit. Multiple wire mounts allow for easy installation of the coil with versatility. Optimized for single coil builds, but can fit dual coils.

Disposable Earloop Folding Dust Mask Particulate Respirator with Breathing Valve Anti PM2.5 Dust / Bacteria / Virus(2 PCS) $7.99
The Disposable Earloop Folding Dust Mask Particulate Respirator is a disposable dust Mask. It could effectively defend various particles in the air includes PM2.5 dust and bacteria / virus. The elastic ear-loops wears easily and comfortable. It comes with adjustable nose bar helps the mask close to face when wearing. 2 PCS / Pack.

YQ95 Disposable Earloop Folding Facial Mask Particulate Respirator Anti PM2.5 Dust / Bacteria / Virus(10 PCS) $29.99
The YQ95 Disposable Earloop Folding Facial Mask Particulate Respirator is a disposable facial mask. It could effectively defend various particles in the air includes PM2.5 dust and bacteria / virus. The elastic ear-loops wears easily and comfortable. It comes with adjustable nose bar helps the mask close to face when wearing. 10 PCS / Pack.

Disposable Earloop Non-woven Facial Masks Particulate Respirator Anti PM2.5 Dust / Bacteria / Virus(50 PCS) $38.99
The Disposable Non-woven Masks are been manufcture from pure virign double Beam Non Woven Fabrics. It could effectively defend various particles in the air includes PM2.5 dust and bacteria / virus. The elastic ear-loops wears easily and comfortable. It comes with adjustable nose bar helps the mask close to face when wearing. The side with filter touches your face. Place the mask to your nose level and put ear loops around your ears.

Original Advken Artha 80W Pod System Vape Kit Replacement Coil Head - 0.8ohm (5 PCS) $10.99
The Advken Replacement Coil Head is designed for Advken Artha 80W VW Box Mod Pod System Vape Starter Kit as a replacement part, which features 0.8ohm coil resistance. 5 PCS / Pack.

Original Advken Artha 80W Pod System Vape Kit Replacement Coil Head - 0.3ohm (Best: 30W) (5 PCS) $10.99
The Advken Replacement Coil Head is designed for Advken Artha 80W VW Box Mod Pod System Vape Starter Kit as a replacement part, which features 0.3ohm coil resistance (Best: 30W). 5 PCS / Pack.

Original Oumier Voocean 40 Pod System Vape Kit / Cartridge Replacemet Coil Head - 0.8ohm (10~15W) (1 PC) $2.88
The Oumier Replacement Coil is designed for Oumier Voocean 40 Pod System Vape Kit / Cartridge, which features 0.8ohm coil resistance and power range from 10W to 15W.

Original Oumier Voocean 40 Pod System Vape Kit / Cartridge Replacemet Coil Head - 0.3ohm (35~40W) (1 PC) $2.88
The Oumier Replacement Coil is designed for Oumier Voocean 40 Pod System Vape Kit / Cartridge, which features 0.3ohm coil resistance and power range from 35W to 40W.

Original Oumier Voocean 40 Pod System Vape Kit Replacemet Pod Cartridge w/o Coils $2.88
The Oumier Replacement Pod Cartridge is designed for Oumier Voocean 40 Pod System Vape Kit, which features 3.5ml e-juice capacity. And with top filling design, it brings you convenience and avoids leakage. In addition, it supports 2 types of coil: 0.3ohm and 0.8ohm. (Coils are not included)

Original Nitecore Intellicharge Upgraded NEW I2 Dual-Slot Li-ion Battery Charger $14.99
The Original Nitecore Intellicharge Upgraded NEW I2 Li-ion Battery Charger is compatible with following Li-ion batteries: 10340, 10350, 10440, 10500, 12340, 12500, 12650, 13450, 13500, 13650, 14350, 14430, 14500, 14650, 16500, 16340(RCR123), 16650, 17350, 17500, 17650, 17670, 18350, 18490, 18500,18650,18700, 20700, 21700, 22500, 22650, 25500, 26500, 26650,Ni-MH(NiCd): AA, AAA, AAAA, C, D. And the Max output is 1000mA.

Original Nitecore Intellicharger I4 New Version Universal Smart Charger $23.99
The Nitecore Intellicharger I4 NEW Version Charger is a universal, automatic smart-charger compatible with almost all types of rechargeable batteries thus eliminating the need to own several chargers. The i4 is able to automatically identify Li-ion, Ni-MH and Ni-Cd rechargeable batteries and apply an appropriate charging mode (Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge). Each of the i4's four microcomputer-controlled charging slots is capable of monitoring and charging batteries independently. Additionally, yellow and blue power / charging status indicator lights could visibly indicate battery status and charging process. i4: The all-new highly advanced smart charger. It's as simple as insert, detect, and charge. This is AU Plug Version.

[3FVape]

Original Steam Crave Aromamizer Plus V2 DL RDTA Advanced Kit original price $62.99, now only $50.99
The Original Steam Crave Aromamizer Plus V2 DL RDTA is a great-looking, high-quality self-winding device that can be used both as an RTA and as an RDTA. The Aromamizer Plus V2 has a diameter of 30mm, it can hold 8ml of e-liquid and also get an 8ml extension set up. Enlarging the tank is possible so that a filling volume of up to an incredible 16 ml is achieved. A juice flow control system is also included to adjust the e-liquid to suit the mixture / temperature. As to the deck arrangement C the deck is a single coil postless deck and also get a mesh build deck included. Regardless of which expansion height is filled from above, the pillarless deck is carefully designed without causing any confusion. The grid platform is also simple and well-designed, so you can also perform operations here successfully. Following on from the Steam Crave tradition of plenty of accessories you can also get a single coil deck, a series deck, and a velocity style deck to customize your Plus V2 even further (these decks are not including in the kit, sold separately). Airflow control has also been revised and optimized, especially for lower output steam. It is even more adjustable and has many options that have been significantly expanded, especially in more restrictive areas. The airflow is adjustable via the ring on the side which has honeycomb inlets. In addition, the ring has the option of 1, 2 or 3 slots and you can also turn the ring upside down to adjust this further. With Steam Crave's unique tank design, you will enjoy the incredible flavor and amazing cloud production.

Original Steam Crave Aromamizer Plus V2 DL RDTA Basic Kit original price $42.99, now only $37.99
The Original Steam Crave Aromamizer Plus V2 DL RDTA is a great-looking, high-quality self-winding device that can be used both as an RTA and as an RDTA. The Aromamizer Plus V2 has a diameter of 30mm and can hold 8ml of e-liquid. A juice flow control system is also included to adjust the e-liquid to suit the mixture / temperature. As to the deck arrangement C the deck is a single coil postless deck. The grid platform is also simple and well-designed, so you can also perform operations here successfully. Following on from the Steam Crave tradition of plenty of accessories you can also get a single coil deck, a series deck, and a velocity style deck to customize your Plus V2 even further (these decks are not including in the kit, sold separately). Airflow control has also been revised and optimized, especially for lower output steam. It is even more adjustable and has many options that have been significantly expanded, especially in more restrictive areas. The airflow is adjustable via the ring on the side which has honeycomb inlets. In addition, the ring has the option of 1, 2 or 3 slots and you can also turn the ring upside down to adjust this further. With Steam Crave's unique tank design, you will enjoy the incredible flavor and amazing cloud production.

Original Hotcig Sniper 18650 80W VW Box Mod Pod System Vape Starter Kit $37.99
The Original Hotcig Sniper 18650 Pod Kit is a tight combination of compact but effective vaping technology, adopt traditional box mod style and new pod usage, provide more comprehensive performance. It is powered by a 18650 external battery (not included), with sufficient power and longer lifespan. Sniper 18650 Pod Kit also uses a feature-rich, stable output HM-80W chip, strong performance. In addition, the Sniper panels are covered in visually striking artistic finish, facilitating easy removal while leaving cut-outs for a juice level viewing window, and a 0.96 inches color screen to relay critical vaping information. As for the Sniper Pod cartridge with a capacity of 3.2ml, it is filled by opening the side silicone plug and easy to pull out. It features a bottom coil installation point, accepting either a 0.4ohm Mesh Coil or 0.17ohm Mesh Coil in a plug 'n' play method. Hotcig Sniper 18650 Pod Kit dedicated mesh coils satisfy you massive clouds and flavors.

Hi forest KN95 Protective Facial Mask Particles Respirator to Defend PM2.5 Dust / Bacteria / Virus(1 PC) $3.99
Hi-forest KN95 Protective Facial Mask is the high-quality facial Mask. It could effectively defend various particles in the air includes PM2.5 dust and bacteria/virus. It has a high-efficiency melt-blown layer which absorbs fine particles in the air, defend bacteria / virus. The facial mask is made by 3D defendable shaped cotton which is (Antibiosis, Antiviral is available), soft and comfortable, allaying shock.

3-Layer Soft Toilet Paper Tissue Bathroom Living Room Decor Toilet Tissue(1 Roll) $2.99
Will you buy this Toilet Paper Tissue from oversea? Maybe your ass has already get clean when you receive the paper. Maybe you will need it from China if it is stockout in the local supermarket. It will be a good choice to get it from oversea in some case.

[3FVape]

Original Auguse V1.5 MTL RTA with 5 Airflow Inserts $25.85
The Original Auguse V1.5 MTL RTA rebuildable tank atomizer is constructed from stainless steel in 22mm diameter and features 5 airflow inserts option for your different flavors (2.0mm, 1.5mm, 1.2mm, 1.0mm, 0.8mm). The Auguse V1.5 MTL RTA can be loaded 4.0ml e-juice through the bottom fill port. The build deck is oriented to accept a single coil configuration with two posts with a single large open terminal on each (coil is not included), affixed from the side via flathead screws. It is very easy to build.

Original Steam Crave Aromamizer Plus V2 RDTA Vape Atomizer Replacement Straight Tank Tube(2 PCS) $7.98
The Original Steam Crave Replacement Straight Tank Tube is designed for Steam Crave Aromamizer Plus V2 RDTA Vape Atomizer as a replacement part, it is made of glass and features 8ml e-juice capacity. 2 PCS / Pack.

Original Steam Crave Aromamizer Plus V2 RDTA Replacement Extension Tank Tube(1 PC) $4.39
The Original Steam Crave Replacement Extension Tank Tube is designed for Steam Crave Aromamizer Plus V2 RDTA Vape Atomizer as a replacement part

Original Steam Crave Aromamizer Plus V2 RDTA Replacement 6mm Chimney Reducer(1 PC) $2.59
The Original Steam Crave Replacement 6mm Chimney Reducer is designed for Steam Crave Aromamizer Plus V2 RDTA Vape Atomizer as a replacement part. It is recommended for single coil deck and mesh deck.

Original Steam Crave Replacement Single Coil Deck for Aromamizer Plus V1 / V2 RDTA(1 PC) $7.29
The Original Steam Crave Replacement Single Coil Deck is made of stainless steel and it is compatible with Steam Crave Aromamizer Plus V1 / V2 RDTA Vape Atomizer as a replacement part.

Original Steam Crave Replacement Series Deck for Aromamizer Plus V1 / V2 RDTA(1 PC) $7.29
The Original Steam Crave Replacement Series Deck is made of stainless steel and it is compatible with Steam Crave Aromamizer Plus V1 / V2 RDTA Vape Atomizer as a replacement part.

Original Steam Crave Replacement Velocity Deck for Aromamizer Plus V1 / V2 RDTA(1 PC) $7.59
The Original Steam Crave Replacement Velocity Deck is made of stainless steel and it is compatible with Steam Crave Aromamizer Plus V1 / V2 RDTA Vape Atomizer as a replacement part.

Firebird Replacement 510 Drip Tip for RDA / RTA / RDTA / Sub-Ohm Tank Vape Atomizer $3.99
The Firebird 510 Replacement Drip Tip is made of Stainless Steel and POM and it is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA. Without Logo.

Disposable 3-Ply Facial Masks Particulate Respirator Anti PM2.5 Dust / Bacteria / Virus / COVID-19 (30 PCS) (Children Version) $20.99
The Disposable 3-Ply Earloop Non-woven Facial Masks Particulate Respirator is made from 1 ply SPP non-woven + 1 ply melt blown non-woven + 1 ply SPP non-woven. It is with adjustable nose bar helps the mask close to face when wearing. The elastic ear-loops wears easily and comfortable. It could effectively defend various particles in the air includes PM2.5 dust and bacteria / virus / Coronavirus Disease 2019 (COVID-19). The elastic ear-loops wears easily and comfortable. It comes with adjustable nose bar helps the mask close to face when wearing. The side with filter touches your face. Place the mask to your nose level and put ear loops around your ears. This is children version and it is fit well for children's face shape.

Disposable 3-Ply Earloop Non-woven Protective Masks Particulate Respirator Anti PM2.5 Dust / Bacteria / Virus /COVID-19 (10 PCS) $8.99
The Disposable 3-Ply Earloop Non-woven Protective Masks Particulate Respirator with CE & FDA Certification is made from 1 ply SPP non-woven + 1 ply melt blown non-woven + 1 ply SPP non-woven. It is with adjustable nose bar helps the mask close to face when wearing. The elastic ear-loops wears easily and comfortable. It could effectively defend various particles in the air includes PM2.5 dust and bacteria / virus / Coronavirus Disease 2019 (COVID-19). The elastic ear-loops wears easily and comfortable. It comes with adjustable nose bar helps the mask close to face when wearing. The side with filter touches your face. Place the mask to your nose level and put ear loops around your ears. Blue or white will be shipped randomly.

KN95 3D Respirator Protective Mask Anti PM2.5 Dust / Bacteria / Virus / COVID-19 - 1 PC (Children Version) $3.99
The KN95 3D Earloop Folding Particulate Respirator Protective Mask with a Breathing Valve could effectively defend various particles in the air includes PM2.5 dust and bacteria / virus / Coronavirus Disease 2019 (COVID-19). The elastic ear-loops wears easily and comfortable. There are 4-ply protection for you to defend varous dust and virus. This is children's version.

KN95 3D Earloop Particulate Respirator Protective Mask with Breathing Valve Anti Bacteria/Virus/COVID-19 - 1 PC (Children Version) $3.99
The KN95 3D Earloop Folding Particulate Respirator Protective Mask could effectively defend various particles in the air includes PM2.5 dust and bacteria / virus / Coronavirus Disease 2019 (COVID-19). The elastic ear-loops wears easily and comfortable. There are 4-ply protections for you to defend varous dust and virus. This is children's version.

KN95 3D Earloop Folding Particulate Respirator Protective Mask Anti PM2.5 Dust / Bacteria / Virus / COVID-19(2 PCS) $6.99
The KN95 3D Earloop Folding Particulate Respirator Protective Mask with CE Certification could effectively defend various particles in the air includes PM2.5 dust and bacteria / virus / Coronavirus Disease 2019 (COVID-19). The elastic ear-loops wears easily and comfortable. It comes with adjustable nose bar helps the mask close to face when wearing. There are 4-ply protections for you to defend varous dust and virus. 2 PCS / Pack.

[3FVape]

Original KIZOKU Kirin Semi-Mech Mechanical Tube Vape Mod $29.99
The Original KIZOKU Kirin Tube Mod comes in thousands of anticipation with high-end elegant Kirin theme graphic design. The shell of Kirin Tube Mod is made of all stainless steel material, possesses the perfect combination of super hardness and beautiful appearance. And the KIZOKU Kirin mod is widely compatible with 18650 / 18350 battery (Batteries are not included) to meet your different needs. Plus the innovative one-in-one key structure and a hand-held compact size, you will receive the excellent flavor and rich clouds. Just get the mod for your KIZOKU Kirin Kit / KIZOKU Kirin Tube now and wander in the beautiful vaping world.

Original Auguse V1.5 MTL RTA with 5 Airflow Inserts $25.85
The Original Auguse V1.5 MTL RTA rebuildable tank atomizer is constructed from stainless steel in 22mm diameter and features 5 airflow inserts option for your different flavors (2.0mm, 1.5mm, 1.2mm, 1.0mm, 0.8mm). The Auguse V1.5 MTL RTA can be loaded 4.0ml e-juice through the bottom fill port. The build deck is oriented to accept a single coil configuration with two posts with a single large open terminal on each (coil is not included), affixed from the side via flathead screws. It is very easy to build.

Original KIZOKU Kirin Semi-Mech Mechanical Tube Mod + Disposable Tank Vape Kit $39.99
The Original KIZOKU Kirin Mech Mod Kit consists of Semi-Mech Mechanical Tube Mod and Disposable Tank, which is optimized for the use with MTL atomizers. Adopting the stainless steel material and Kirin theme graphic design, it will bring you durable use and comfortable gripping. The atomizer comes with 2ml e-juice capacity and 0.5ohm coil for restricted DL vaping. You can also make it to MTL vaping by choosing the advanced tank with 1.2ohm coil. The oil can be refilled quickly with the bottom silicone plug filling design. Moreover, the Kirin mod is compatible with 18350 battery and it can be extended to 18650 battery with the 18650 extended tube (18350 and 18650 Batteries are not inclueded), which meets your different needs. In general, the Kirin mech kit is compact yet functional, you will acquire a quite amazing vaping experience.

Original KIZOKU Kirin Semi-Mech Tube Mod Replacement Disposable Tube Tank with 1.2ohm Coil(3 PCS) $6.99
The Original KIZOKU Replacement Disposable Tank Tube is designed for KIZOKU Kirin Semi-Mech Tube Vape Mod as a replacement part, which is made of PCTG. It comes with 2ml e-juice capacity and a 1.2ohm resistance coil. 3 PCS / Pack.

Original KIZOKU Kirin Semi-Mech Tube Mod Replacement Disposable Tube Tank with 0.5ohm Coil(3 PCS) $6.99
The Original KIZOKU Replacement Disposable Tank Tube is designed for KIZOKU Kirin Semi-Mech Tube Vape Mod as a replacement part, which is made of PCTG. It comes with 2ml e-juice capacity and a 1.2ohm resistance coil. 3 PCS / Pack.

Original KIZOKU Kirin Semi-Mech Tube Vape Mod Replacement MTL / DL 2ml Disposable Tube Tank with Drip Tip & Base + 0.5ohm Coil $8.99
The Original KIZOKU Replacement MTL / DL Disposable Tank Tube is designed for KIZOKU Kirin Semi-Mech Tube Vape Mod as a replacement part, which is made of PCTG. It comes with 2ml e-juice capacity and a 0.5ohm resistance high quality cotton coil inside for excellent taste. Featuring accurate airflow control system and bottom silicone plug filling design, you can enjoy the great flavor with easy operation. What is more, it supports MTL vaping and restricted DL vaping. Moreover, Drip Tip and a SS Base are included.

Steam Tuners Replacement Bell Cap Clone for Dvarw MTL RTA $5.99
The Steam Tuners Replacement Bell Cap Clone is made from PMMA for Steam Tuners Dvarw MTL RTA Clone. The cap is 22mm diameter and the height of this cap is 21mm. The bell cap has a 2ml juice capacity.

Original Vandy Vape Mato RDTA Vape Atomizer Replacement 810 Drip Tip $2.59
The Original Vandy Vape Replacement 810 drip tip is made of resin. It is designed for Vandy Vape Mato RDTA Vape Atomizer and it is also suitable for Goon RDA, Goon 25mm RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA, Vandy Vape Pulse V2 RDA, Vandy Vape Pulse X RDA, Vandy Vape Kylin V2 RTA, Hellvape Drop Dead RDA, Wotofo Profile RDA, Wotofo Serpent Elevate RTA, Digiflavor Drop Solo RDA, Geekvape Loop V1.5 RDA, THC Tauren Honeycomb RTA.

Original ALiCN R1D1 Forehead Non-contact Infrared Digital Body Clinical Thermometer $75.99
The Original ALiCN R1D1 Clinical Thermometer is a Forehead Non-contact Infrared Digital Body Clinical Thermometer, which comes with pracitical patent design that infrared induction is faster and more comprehensive. Also, the Clinical Thermometer is equipped with a HD LED large screen that provide you the data of device. Furthermore, there are multiple functions like automatic shutdown, high temperature warning, accurate measurement, and 32 sets of memory which make you use it more conveniently. What's more, it can provide One key One second non contact measurement that makes mesurement more safer.

Original ALiCN R1A3 Ear & Forehead Non-contact Infrared Digital Body Clinical Thermometer $79.99
The Original ALiCN R1A3 Clinical Thermometer is a Ear & Forehead Non-contact Infrared Digital Body Clinical Thermometer, which comes with infrared induction is faster and more comprehensive. Also, the Clinical Thermometer is equipped with a LED large screen that provide you the data of device. Furthermore, there are multiple functions like automatic shutdown, high temperature warning, accurate measurement, and forehead & Ear double use which make you use it more conveniently.

[3FVape]

Original Aspire Nautilus XS Sub Ohm Tank Vape Atomzier $21.99
The Aspire Nautilus XS tank is constructed from stainless steel (body) and glass (tube) in 22mm diameter, which represents the latest exciting development, advancing the original Nautilus X format further, presented a sleek and versatile replaceable U-Tech coil,designed to exceed your expectations. Precision engineered for ultra-smooth and consistent airflow operation, the Nautilus XS is equipped with two large airflow holes, which feed air into the coil chamber from above the refillable tank section. These holes are adjusted easily, to allow fast tuning for a wide variety of airflow styles. The XS tank supports top filling system that convenient to refill. The Nautilus XS tank system uses the Nautilus X coil with enhanced features such as top airflow adjustment from MTL to restricted DTL, easy to use filling system, and cooling fins next to the mouth tip to reduce heat build up.

Original Aspire Rover 2 NX40 40W 2200mAh VV VW Box Mod Starter Kit with Nautilus XS Tank $51.99
The Original Aspire Rover 2 NX40 40W 2200mAh VV VW Box Mod Vape Starter Kit consists of NX40 Mod and Nautilus XS Tank, it takes compact vaping to a new level with it's fit in your hand size and legendary Nautilus vaping performance. The Rover 2 uses the new exciting NX40 mod, which is powered by 2200mAh built-in battery that delivers up to 40 watts of power. To complete the new Rover 2, Aspire took the legendary Nautilus XS and matched its performance to the NX40 mod. The new Nautilus XS tank system uses the Nautilus X coil with enhanced features such as top airflow adjustment from MTL to restricted DTL, easy to use filling system, and cooling fins next to the mouth tip to reduce heat build up. The Rover 2 is a small, compact design that fits in the palm of your hand, but has the performance of mods twice its size.

Original Nitecore UM20 2-Channels Li-ion Battery USB Charger for 18650 / 18490 / 18350 / 17670/17500/16340 (RCR123)/14500/10440 $14.99
The Nitecore UM20 is a USB powered two channels Li-ion battery charger, which is compatible with Li-ion / IMR: 18650, 18490, 18350, 17670, 17500, 16340(RCR123), 14500, 10440 sized batteries. (Batteries are not included)

Original Aspire Nautilus XS Sub Ohm Tank Replacement Mesh Coil Head(5 PCS) $14.99
The Original Aspire Nautilus XS Replacement Mesh Coil Head is desigend for Aspire Nautilus XS Sub Ohm Tank Vape Atomizer as a replacement part. It features 0.7ohm coil resistance and power range from 18W to 22W. 5 PCS / Pack

Original VAPJOY DIY Rebuild Kit for SMOK RPM80/ RPM80 Pro - Opening Tool Kit + Cottons + RPM-Triple Ni80 Triple Coils (0.6ohm) $2.99
The Original VAPJOY DIY Rebuild Kit is suitable for SMOK RPM80/ RPM80 Pro Pod System. The authentic Vapjoy DIY Rebuild Kit consists of 1 x Opening Tool Kit, 40 x Cottons and 10 x RPM-Triple Ni80 Triple Coils (0.6ohm). It is designed to replace coil head economical, RPM pod vapers would easy rebuild their Pods quickly. Enjoy fun to Rebuild. It can meet most of DIY lovers' demand.

Original VAPJOY DIY Rebuild Kit for SMOK RPM80/ RPM80 Pro - Opening Tool Kit + Cottons + RPM-VM1 Ni80 Mesh Coils (0.4ohm) $3.59
The Original VAPJOY DIY Rebuild Kit is suitable for SMOK RPM80/ RPM80 Pro Pod System. The authentic Vapjoy DIY Rebuild Kit consists of 1 x Opening Tool Kit, 40 x Cottons and 10 x RPM-VM1 Ni80 Mesh Coils (0.4ohm). It is designed to replace coil head economical, RPM pod vapers would easy rebuild their Pods quickly. Enjoy fun to Rebuild. It can meet most of DIY lovers' demand.

Original VAPJOY DIY Rebuild Kit for Voopoo Vinci / Vinci X / Vinci Air Kit - Rod + Cottons + VINCI-VM1 Ni80 Mesh Coils (0.3ohm) $3.59
The Original VAPJOY DIY Rebuild Kit is suitable for for Voopoo Vinci / Vinci X / Vinci Air Kit. The authentic Vapjoy DIY Rebuild Kit consists of 1 x Rod, 35 x Cottons and 10 x VINCI-VM1 Ni80 Mesh Coils (0.3ohm) rated for 32~40W (DTL). It is designed to replace coil head economical, VINCI pod vapers would easy rebuild their Pods quickly. Enjoy fun to Rebuild. It can meet most of DIY lovers' demand.

Original VAPJOY DIY Rebuild Kit for Voopoo Vinci / Vinci X / Vinci Air Kit - Rod + Cottons + VINCI-R1 Ni80 Coils (1.0ohm) $2.59
The Original VAPJOY DIY Rebuild Kit is suitable for for Voopoo Vinci / Vinci X / Vinci Air Kit. The authentic Vapjoy DIY Rebuild Kit consists of 1 x Rod, 40 x Cottons and 10 x VINCI-R1 Ni80 Coils (1.0ohm) rated for 12~18W (MTL). It is designed to replace coil head economical, VINCI pod vapers would easy rebuild their Pods quickly. Enjoy fun to Rebuild. It can meet most of DIY lovers' demand.

[3FVape]

Original ATNNK Portable Non-washing Sanitizer Anti-Bacterial Instant Hand Sanitizer inhibit Bacteria / Virus / COVID-19 - 100ml $4.99
The Instant Hand Sanitizer is easy to use, it can inhibit 99.99% of bacteria. It features natural ingredients can inhibit Bacteria / Virus / COVID-19 effectively. The cream shape makes it convenient to use, which will keep your hands refresh, no sticky, no greasy. Air dries within seconds. Use without water and add moisturisers.

Original ATNNK Protective Wash Hands Alcohol Instant Hand Sanitizer inhibit Bacteria /Virus/COVID-19 - 100ml (Children Version) $4.99
The Protective Wash Hands Alcohol Instant Hand Sanitizer is easy to use, it can inhibit 99.99% of bacteria. It features natural ingredients, the content of alcohol is 75% which can inhibit Bacteria / Virus / COVID-19 effectively. The cream shape makes it convenient to use, which will keep your hands refresh, no sticky, no greasy. Air dries within seconds. Use without water and add moisturisers.

Original Vinda Non-alcoholic Adult Sterilization Wipes inhibit Bacteria / Virus / COVID-19(80 PCS) $7.99
The Vinda Adult Wet Wipes is easy to use, it can inhibit 99.99% of bacteria. It features natural ingredients, and consists of pure water, benzyl ammonium chloride, non-woven. It is no alcohol which can inhibit Bacteria / Virus / COVID-19 well. 80 PCS / Pack

Orginal Vinda Non-alcoholic Adult Sterilization Wipes inhibit Bacteria / Virus / COVID-19(10 PCS) $2.99
The Vinda Adult Wet Wipes is easy to use, it can inhibit 99.99% of bacteria. It features natural ingredients, and consists of pure water, benzyl ammonium chloride, non-woven. It is no alcohol which can inhibit Bacteria / Virus / COVID-19 well. 10 PCS / Pack

Original 3M 1621AF Chemical Goggle Glasses for Anti-Impact / Anti Chemical Splash / Anti-Fog / Anti-Bacteria / Virus / COVID-19 $9.99
The original 3M 1621AF Chemical Goggle Glasses is made of Polycarbonate material in 150 x 80 x 70mm size. It is suitable for Anti-Impact / Anti Chemical Splash / Anti-Fog / Lens Eye Protection / Anti-Bacteria / Virus / COVID-19.

Original Coil Master ReBuild Kit for GeekVape Boost Kit - 1 Opening Pry Tool Kit + 40 Cottons + 10 Ni80 Mesh Coils (0.4ohm) $6.99
The Original Coil Master ReBuild Kit is suitable for GeekVape Boost Kit. It consists of 1 x Opening Pry Tool Kit, 40 x Cottons and 10 x Ni80 Mesh Coils (0.4ohm). It can meet most of DIY lovers' demand. It can rebuild the pod coil quickly & easily.

Original Coil Master ReBuild Kit for SMOKTech SMOK RPM Kit - 1 Opening Pry Tool Kit + 40 Cotton + 10 Ni80 Triple Coils (0.6ohm) $6.99
The Original Coil Master ReBuild Kit is suitable for SMOKTech SMOK RPM40 / RPM 80 / RPM 80 Pro Kit. It consists of 1 x Opening Pry Tool Kit, 40 x Cottons and 10 x Ni80 Triple Coils (0.6ohm). It can meet most of DIY lovers' demand. It can rebuild the pod coil quickly & easily.

Original Coil Master ReBuild Kit for SMOKTech SMOK RPM Kit - 1 Opening Pry Tool Kit + 40 Cottons + 10 Ni80 Mesh Coils (0.4ohm) $6.99
The Original Coil Master ReBuild Kit is suitable for SMOKTech SMOK RPM40 / RPM 80 / RPM 80 Pro Kit. It consists of 1 x Opening Pry Tool Kit, 40 x Cottons and 10 x Ni80 Mesh Coils (0.4ohm). It can meet most of DIY lovers' demand. It can rebuild the pod coil quickly & easily.

[3FVape]

Original Reewape AS300 Replacement 810 Drip Tip for SMOK TFV8 / TFV12 Tank / Kennedy / Battle / Reload RDA $1.69
The Reewape AS300 810 Replacement drip tip is made of resin and it is suitable for SMOK TFV8 Tank, TFV8 Big Baby Tank, TFV12 Tank, Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.

Replacement 510 Drip Tip for RDA / RTA / RDTA / Sub Ohm Tank Vape Atomizer original price $1.99, now only $0.59
The Replacement 510 Drip Tip is suitable for all atomizers that fit 510 drip tip, such as OBS Engine 2 RTA, GeekVape Ammit MTL RTA, Phevanda Bell MTL RDA, Gas Mods G.R.1 GR1 Pro RDA, Vapefly Galaxies MTL Squonk RDTA, Vandy Vape Berserker MTL RDA, Ubertoot MTL RTA.

Replacement 810 Drip Tip for Goon / Kennedy / Battle / Reload RDA orignal price $1.99, now only $0.59
The Replacement 810 drip tip is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.

Replacement 810 Drip Tip for Goon Kennedy / Battle / Reload RDA original price $2.99, now only $0.79
The Replacement 810 drip tip is suitable for Goon RDA, Goon RTA, Lost Art Goon RDA, Goon LP RDA, Kennedy 24 / 25 RDA, Battle RDA, Kryten RDA, Mad Dog RDA, Mask RDA, CSMNT Cosmonaut RDA, Unholy RDA, Apocalypse GEN 2 RDA, Reload RDA, Mini Battle RDA, Avid Lyfe Captain Cap II, Sith RDA.

Replacement Drip Tip for SMOKTech SMOK TFV16 Sub Ohm Tank $1.99
The Replacement Drip Tip is designed for SMOKTech SMOK TFV16 Sub Ohm Tank as a replacement part. It is made of epoxy resin material.

Original Coil Master Pro Cotton for RBA / RDA / RTA / RDTA Vape Atomizer(10 PCS) $3.99
The Original Coil Master Pro cotton is high-quality cotton dedicated for vaping. No colorant, or chemical treatment. It is made of 100% Indonesian Organic Cotton which will bring you a purer and cleaner taste and vape. It is suitable for DIY vaping lovers well. 10 PCS / Pack.

SXK Replacement Airflow Inserts for Bridg'D Kit(4 PCS) original price $9.90, now only $8.59
The SXK Replacement Airflow Inserts is suitable for SXK Bridg'D Kit as a replacement part. The airflow inserts hole size includes: 1.5mm / 2mm / 3mm / 3.5mm, and the airflow insert size is 12 x 6mm. 4 PCS / Pack.

SXK Replacement Top Cap Chimney for SXK Bridg`D Kit original price $9.90, now only $8.59
The SXK Replacement Top Cap Chimney is suitable for SXK Bridg'D Kit as a replacement part. The Top Cap Chimney size is 22 x 17mm and it is made of 316 Stainless Steel.

SXK Bridg'D Bridg D MTL / DL RBA Rebuildable Atomizer Clone with 2.5mm Airflow Insert for SXK BB / Billet Box Mod Kit original price $21.90, now only $19.99
The SXK Bridg'D RBA Rebuildable Atomizer Clone is constructed from 316 Stainless Steel, which is suitable for SXK BB / Billet Box Vape Mod Kit as a replacement RBA part. The RBA is easy to build and wick. It supports MTL / DL vaping experience, zero dry hits, dialing airflow is very easy, and fitments are flawless. The RBA comes with a 2.5mm airflow insert, a full RBA Deck, 2 Cap / Chimneys, a bridg'd key, a 510 adapter tool, panda button, integral tip, and spare bag (o-rings and screws).