Review: Freemax Twister 30W Kit - simple, versatile and convenient
Autors: 30 Jūl 2020, 10:56
Freemax vape company has acquired novelty - Freemax Twister 30W Kit, and this is a continuation of the already familiar product line. Therefore, in the absence of unnecessary "nuns", I suggest you get acquainted quickly.
Parameters
Dimensions: 78.3 x 22mm
Weight: 127.2g Body
Material: Stainless Steel + Plastic
Power: Built-in 1400mAh
Output Power: 7.5 - 30W
Voltage Range: 1.9 - 7.5V
Operating Mode: VW
Supported Resistance: 0.5 - 3.0Ω
Protection: from low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: steel 510, pin gold-plated, spring-loaded
Screen / diagonal: no
Fireluke 22 Tank
Body material: stainless steel Atomizer
type: maintenance-free
Evaporator resistance: 0.5 / 1.0 / 1.5Ω
Capacity: 2 / 3.5ml
Diameter: 22mm
Height: 51.4 / 58.07mm with drip type
Connector: 510, pin gold plated
Weight: 48.3g
Sliding filling with child protection. The capacity is not the largest, but it can be a value due to the complete bubble glass. Here, of course, the dimensions must be taken into account - the diameter of the vape tanks nothing.
There are three types of replaceable evaporators, moreover, only two of them will be in the vape mods. Adjustment of airflow with a standard rotary ring - point setting. The pipe mod is very simple, on top there is a 510th non-hybrid connector, and on the side there is a fire button with a built-in LED indicator.
The ring on the base is responsible for adjusting the power, and the tuning range is naturally small. The device is powered by a built-in battery that is not the largest capacity. Fortunately, at least the charging is relatively smart. The connectors used for these purposes have been fixed on the back of the module.
Other new pod we recommend: https://vapesourcing.com/vaporesso-xros-kit.html
Related pod you may like:
buy suorin air ul kit
buy smok mag p3 mini kit
Parameters
Dimensions: 78.3 x 22mm
Weight: 127.2g Body
Material: Stainless Steel + Plastic
Power: Built-in 1400mAh
Output Power: 7.5 - 30W
Voltage Range: 1.9 - 7.5V
Operating Mode: VW
Supported Resistance: 0.5 - 3.0Ω
Protection: from low / high resistance, from overheating, from short circuit, from overcharge / overdischarge
Connector type: steel 510, pin gold-plated, spring-loaded
Screen / diagonal: no
Fireluke 22 Tank
Body material: stainless steel Atomizer
type: maintenance-free
Evaporator resistance: 0.5 / 1.0 / 1.5Ω
Capacity: 2 / 3.5ml
Diameter: 22mm
Height: 51.4 / 58.07mm with drip type
Connector: 510, pin gold plated
Weight: 48.3g
Sliding filling with child protection. The capacity is not the largest, but it can be a value due to the complete bubble glass. Here, of course, the dimensions must be taken into account - the diameter of the vape tanks nothing.
There are three types of replaceable evaporators, moreover, only two of them will be in the vape mods. Adjustment of airflow with a standard rotary ring - point setting. The pipe mod is very simple, on top there is a 510th non-hybrid connector, and on the side there is a fire button with a built-in LED indicator.
The ring on the base is responsible for adjusting the power, and the tuning range is naturally small. The device is powered by a built-in battery that is not the largest capacity. Fortunately, at least the charging is relatively smart. The connectors used for these purposes have been fixed on the back of the module.
Other new pod we recommend: https://vapesourcing.com/vaporesso-xros-kit.html
Related pod you may like:
buy suorin air ul kit
buy smok mag p3 mini kit